You are reading the article 9 Amazing Ways To Handle Working updated in December 2023 on the website Daihoichemgio.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 9 Amazing Ways To Handle WorkingHandle Working For A Younger Boss
A Younger Boss in your old organization can be possible as well because younger people are full of ideas, digitally savvy, flexible, and move up the corporate ladder at a faster pace. With millennialism making up the largest demographic in the workplace, the chances of reporting to the boss decades younger than have increased greatly, especially if you are joining a new industry like technology in your 40s.
“You can’t help getting older, but you don’t have to get old.”
Start Your Free Personal Development Course
Effective resume making, job hunting, campus recruitment training & others
The industry goes through a continuously changing process in terms of technology, procedures, policies, and employees. The organization retains employees that contribute their best. Organizations also need to have employees who are dynamic and full of fresh ideas. Age doesn’t matter regarding experience, knowledge, skill sets, wisdom, ideas, and emotions. A situation comes in our work lives when we end up reporting to a boss who’s younger than us because the organization wants the best results. These get achieved when the best people, regardless of what age group they belong to, work together, respecting their abilities.
This should also not make any difference in our efficiency and efficacy towards the organization. The experience and wisdom that comes with the senior employees are vital. The managerial positions might be full of younger people. However, it’s important to have people from different generations in an organization to achieve the goals and survive in the long run.
“Age isn’t how old you are but how old you feel.”
– Gabriel García MárquezIntroduction
Age is just a number. No one can stop you from working or growing if you accept and adapt to changes gracefully and positively. There are generation gaps and differences in the workplace that work as a major challenge and an obstacle. However, the secret to making this situation work is respecting and being flexible toward each other’s approach, leaving the usual stereotypes behind.
Communication has a key role to play. This is an awkward and tricky situation to face emotionally, and it might poke you day in and day out if you keep thinking about it and carrying the baggage along. However, with the changing needs and demographics of the work environment, it’s better to learn new things and be true and honest towards your work. This will make the young employer and older subordinate understand each other’s mindset and create a coercive and inclusive work environment. With this, it’s also necessary that the more senior employees keep their egos aside and respect their new bosses, who come with a lot of expectations and huge responsibilities in the new organization. It helps them by providing mentored assistance to contribute towards the achievement of the organizational goal together as a team.
It also becomes difficult for companies to let go of employees who have been the best and most productive performers. However, with old age comes illness and rigidity, increasing costs, and the inability to adapt to changes. So being mentally, emotionally, and physically fit is of utmost importance. This creates an aura of confidence and oomph around you and helps you give your best. Older employees can follow some tips to help them manage their work under a younger boss and help the organization grow in the cut-throat competitive world.9 Ways To Handle Working for a Younger Boss: 1. Control your Attitude
Everyone goes through a series of events in their life that flash across their mind and eyes when they grow older. It can be an experience you had in high school, at your workplace or at home. It’s important to remember that once you were a young boss rising the ladder, filled with enthusiasm to take over the entire world, handling a team with people of different ages and backgrounds.
Similarly, it is essential to listen to what your boss is saying and respect their position and decisions. Gauge his thought process and mold yourself accordingly to make things easy and constructive. Be open to your boss’s insights and suggestions to share and accept them positively. Forget your ego, as it never helps.2. Showcase your Strengths
The most important tool you have as an older employee is your experience and maturity, which can help you resolve issues more quickly than younger ones. It’s necessary to focus on what you can offer your boss and tell him not to worry but prove it through your actions and strengths.
Younger bosses know you might have difficulty reporting to someone younger than them. They might also be concerned if you are unwilling to adapt to new changes, try new methods, work with new technology, or even lack the competency to do your assigned job. Just focus on showcasing your strengths at every level.3. Keep the word “Age” away
The times have changed. Age is not proportional to intelligence and knowledge anymore. Therefore, using it as your trump card to keep your point above everyone should not even be the last option to try. It’s just best to avoid getting into conversations that date you.4. Be enthusiastic and ready to learn
You must have managed a team of people when you were young and know it is not easy. A manager loves people who are easy and fun to work with. Therefore, younger bosses correcting you or suggesting ways should not offend you. Experts must adapt to changes and learn new trends by updating themselves.
With changing demographics of the workplace, it is necessary to blend the strengths of the traditional and latest working styles to come up with ideas that contribute constructively and effectively. Being enthusiastic, positive, and flexible makes it easy for the boss to delegate proper authority and responsibility among team members. This creates an opportunity for the younger boss to prove his mettle, thus, appreciating your efforts.5. Become digitally savvy
Maintaining good rapport with your boss is extremely important. You have to be very cautious about communicating with the younger boss, so there is no gap in the communication process. Get used to the modern lingo and abbreviated words. It helps to understand the message your boss wants to convey and prepare for in-person communication.6. Stay Competent and Flexible
If you have been working in this organization for decades and think you can have a lenient or careless attitude toward things, then you are wrong. Young bosses are sharp and smart and can quickly identify people with less competency and negative behavior. The younger bosses are proactive and dynamic and look for employees who are diligent and dedicated to their work.
The younger generation believes in competency, mental presence, and a proactive attitude. Make sure skipping work and absenteeism does not affect the performance of the organization in the long run. Don’t leave any stone unturned to prove your competency and flexibility towards procedures at work with your boss.7. Stop acting Old
“Aging is not lost youth but a new stage of opportunity and strength.”
– Betty Friedan
Regularly working out and eating healthy is vital to keep you physically fit. Remember, a healthy mind resides inside a healthy body. So when you are in good shape, you have a confident aura and oomph that makes you youthful regardless of age.8. Offer Assistance and Constructive Ideas
Your experience is the most powerful tool that can provide future use to improve productivity in the office and the efficacy of your organization. Aim to be a partner and mentor to your new boss. Help your new boss know about his new workplace, its culture, policies, and deep-rooted guidelines. So that he can adjust to the new environment. Your goal should be to work with your younger boss more as a co-worker offering constructive ideas rather than being critical. This helps to make your team and organization successful.9. Be Transparent and Accountable
Transparency is the best trait of a productive employee. Any boss, younger or older, can never be against a reliable employee who delivers results on time. Be authentic and genuine to your work, team, and boss. Develop ideas to produce the best results and maximize profits through the right methods rather than adapting the wrong means. Your long-earned respect and integrity will be useless if you are not trustworthy.Conclusion
It’s a very good idea to acknowledge your boss’s capabilities and decisions. Once you start doing this, looking at and further working on your skills will be much easier. And from that point on, you can strategize how the two of you can develop into and work together as an effective and result-oriented team.
Age is just a number, and it’s essential to recognize the organization’s needs and change accordingly. Take the best from the older employees’ experiences and the younger bosses’ talents, working together as an effective team and delivering productive results.
Therefore, rather than being angry or disappointed, take this situation as a new challenge by assisting your new boss with the company culture and values, and policies of the organization, staying enthusiastic and flexible, adapting to the latest technology and changes, and making the workplace healthy and constructive. Being prepared mentally and physically helps you in generating new ideas. It also helps to enhance confidence limits and helps your organization grow and thrive in the cut-throat competition of the ever-changing work environment. Be you and give your best to the organization that has been a constant source of income and motivation for you for so many years.
You're reading 9 Amazing Ways To Handle Working
Surface Pen tip not Working but Eraser is: 9 Ways to Fix it Is Surface Pen tip not working? Apply these fixes to resolve it
Many Surface owners reported that sometimes their Pen tip doesn’t work.
You can check the battery of the Pen or reinstall the driver.
This guide has many other solutions that will help you resolve the problem.
INSTALL BY CLICKING THE DOWNLOAD FILE
To fix Windows PC system issues, you will need a dedicated tool
Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:
Download Fortect and install it on your PC.
Start the tool’s scanning process to look for corrupt files that are the source of your problem
Fortect has been downloaded by
readers this month.
Microsoft Surface is a great device, but many users reported that their Surface Pen tip isn’t working. Surprisingly, the eraser works fine, but the pen won’t write or work. This can be a big problem, but there’s a way to fix this issue.
Surface Pen issues can cause many problems, and speaking of Surface Pen, here are some common issues that users reported:
Surface Pen driver error – This issue can occur if your driver is outdated or corrupted. Reinstall or update your drivers, and the case should be resolved.
Surface Pen no light – If the LED won’t light up on your Surface Pen, it’s somewhat likely that your battery is empty, so you’ll need to replace it.
Surface Pro 4 pen not writing, but buttons work – This problem can occur due to your battery, so be sure it’s working correctly.
Surface Pen tip doesn’t work, won’t write – If you encounter any of these issues, try some of our solutions and check if that helps.Why is my Surface Pen tip not working?
The battery of the Surface Pen is dead or faulty.
You haven’t paired the Surface Pen to your Surface Pro.
There is a pending Windows update available that you haven’t installed.
You are using an incompatible app to use the Surface Pen.
The Surface Pen itself is faulty.
Another stylus or pen is connected to your PC and conflicts with the Surface Pen.How do I fix the Surface Pen tip if it’s not working? 1. Check the battery
Several users reported that the Surface pen tip is not working for them at all. The pen pairs with the Surface, but it’s unable to write.
A drained battery usually causes this, and to fix the problem, replace the AAAA battery with a new one, and the issue should be resolved.
Another method you can use is to unscrew the pen, just enough to cut power to it. Now wait a few seconds and screw the pen to power it up.
This method might work for some users, so you might want to try it out. In addition to replacing the battery, be sure to check if your battery isn’t inserted upside down.
Several users reported that their battery wasn’t properly inserted and that caused the issue to appear. After flipping the battery, the problem was fixed.
Sometimes, you must take out the battery and put it back in. For example, there might be some dust on the contacts of your battery, and that can cause this issue to appear, but by removing and reinserting the battery, the problem should be fixed.
In some cases, you might even have to clean your contacts manually in order to fix the issue.2. Install the latest updates, drivers, and firmware
If the Surface Pen tip is not working properly, the issue might be the lack of system updates. Windows 10 is a solid operating system, but sometimes issues can occur if you don’t have the latest updates installed.
The updating process is quite streamlined in Windows 10, and it will automatically download the missing updates, for the most part.
If any updates are available, they will be downloaded automatically and installed as soon as you restart your PC. After updates are installed, check if the problem is still there.
If the problem is still there, even after installing the latest system updates, be sure to install the latest firmware and driver updates for your Surface device. You can download the necessary files right from Microsoft’s website.
However, if you don’t want to download the drivers manually, you can always use third-party solutions to automatically update all your drivers.
Not only is this tool much easier to use, you always know that it will get the driver versions right and that they are always the latest available.
More so, Outbyte Driver Updater is called that way because it can also detect faulty or missing drivers and replaces them with the latest versions as well.
Lastly, the update and repair process is done mainly by the program, and as long as you have an Internet connection, the process can be fully automated as well.
⇒ Get Outbyte Driver Updater3. Remove and pair your pen again
In some cases, there might be a glitch with your pen that is causing the Surface Pen tip not to work. This can occur for a number of reasons, but you can fix the problem simply by removing the pen and pairing it up again with your Surface device.
After doing that, you just need to pair your pen with Surface once again. Simply press and hold the button for 6 seconds until the light glows. Now pair the pen with your PC.
After doing that, check if the problem is still there. As you can see, minor glitches with Bluetooth can occur, but in most cases, you should be able to fix them simply by unpairing and pairing your pen with your system.4. Disable the pen in Device Manager
Once you enable your pen, check if it works with your Surface device. If that doesn’t work, perhaps you should try disabling the Intel(R) Precise Touch Device.
A number of users reported that disabling and enabling Intel(R) Precise Touch Device in Device Manager fixed the problem for them, so be sure to try that.
Keep in mind that this is just a workaround, so you might have to repeat it if you shut down your Surface.5. Reinstall the pen driver
Sometimes your Surface Pen tip won’t work because of your driver. There might be an issue with your drivers, and that could lead to this and many other problems.
However, you can fix this problem simply by reinstalling the pen driver. Once the driver is reinstalled, check if the problem is still there.6. Perform a hard reset
Press and hold the Power button for about 25-30 seconds.
Be sure to completely shut down your device.
Now press and hold the Power button and Volume Up button until you see the Surface logo on the screen.
You should now see the UEFI menu.
Exit the UEFI menu and your PC will restart.
If the Surface Pro tip is not working properly, you might be able to fix this issue simply by performing a hard reset.
Once your device boots, check if the problem with the pen is still there.7. Make sure that other devices aren’t interfering with your touchscreen
In some cases, your Surface Pen tip won’t work if other electrical devices are interfering with your touchscreen.
This is unlikely, but a handful of users claim that certain devices, such as lamps can interfere with their touchscreen.
To fix the problem, simply move away from these devices and your touchscreen and Surface Pen will start working again. This is an unlikely solution, but you can still try it out if you want.8. Run the troubleshooter
According to users, sometimes the Surface Pen tip won’t work due to certain glitches on your system. However, you might be able to fix those glitches automatically by running the built-in troubleshooter.
After the troubleshooter is finished, check if the problem is still there. In addition, you might want to try running the Bluetooth troubleshooter and check if that solves the problem.9. Replace the Surface pen tip
Use a pair of tweezers to pull out the pen tip all the way out.
Gently press the new pen tip in the same location gently, and avoid applying pressure on the tip itself.
If none of the solutions we outlined above work, you might think of finding a Surface pen tip replacement.
You will be able to find some in the Microsoft Store but there are plenty of other resellers that have them in their inventory.
Just be careful to get the right tip for your exact model of Surface Pen because there are a few different kinds on the market.How do I fix Surface Pen tip not if it’s not working on Windows 11?
Check for Windows updates.
Check if the Surface Pen is compatible with your Surface device.
The battery level of the phone is crucial. Check if that is okay or not.
Unpair and then connect it back to your Surface Pro.
Reset the Surface Pen.Does Surface Pen work without a battery?
No. The Surface Pen does not work without a battery. You need to make sure that it is charged to 100% in order to use it.
It will stop working once the battery is dead, and you will have to replace it. According to Microsoft, the Surface Pen with a rechargeable battery will give you a battery life of about 15 hours.
Surface Pen issues can be problematic, but we hope that you managed to solve this issue by using one of our solutions.
Of course, if the pen doesn’t work even with a replacement tip, you may consider replacing the Surface Pen with a new one altogether.
Was this page helpful?
Is OneNote failing to upload or download notes on your Windows PC? Connectivity issues, buggy sync settings, file corruption, and file corruption are likely reasons that can result in OneNote not syncing on your PC.
You might receive an error code or message that makes identifying and troubleshooting a specific sync issue in OneNote easier. But that’s not the case all the time, so you may have to work through multiple fixes to set things straight.
Table of Contents
The instructions below should help you address sync-related problems on the Windows 10 and Microsoft 365 versions of OneNote. Feel free to skip any that don’t apply.Check the OneNote Service Status
It’s best to kick things off by checking if a problem on the server-side is causing issues with OneNote not syncing. To do that, open OneNote Online and check if everything’s up-to-date. If not, head over to the Office Service Status page using your web browser.
If you notice any problems listed next to Office for the web (Consumer), you must wait it out until Microsoft fixes them.Force-Sync OneNote Reset Sync Connection
If your desktop has trouble updating changes made from another device, closing and re-opening the notebook should reset the connection and prompt OneNote to start syncing correctly again.
2. Sign in to OneNote Online and select the notebook.
3. Select the Open in Desktop App option on the OneNote Online ribbon to re-open the notebook in OneNote for Windows 10 or Microsoft 365.Check OneNote’s Sync Settings
If OneNote fails to sync automatically, check if you’ve set up its sync settings correctly.OneNote for Windows 10
1. Open the More menu (select the icon with three dots at the left-corner of the OneNote window) and select Settings.
2. Select Options.
3. Turn on the switches under Sync notebooks automatically and Download all files and images.OneNote for Microsoft 365
1. Open OneNote’s File menu.
2. Select Options.
3. Select Sync on the OneNote Options sidebar. Then, check the boxes next to Sync notebooks automatically and Download all files and images.Free Up OneDrive Space
OneNote syncs your notes via OneDrive. However, insufficient cloud storage space can also result in issues. The 0xE0000796 error code shows up specifically for that reason.
If your OneDrive quota is almost full, try freeing up some space by deleting unnecessary files. That just might end up making a difference.Copy to New Section and Sync
If a specific section of a notebook keeps failing to upload to OneNote Online or your other devices, copying the data to a new section may help fix that. The 0xE000005E error code often accompanies this specific sync issue.
1. Select the notebook and create a new section (select Add section) via the OneNote sidebar.
3. Select the new section and select Copy.
If the section now starts syncing correctly, you can delete the old section. You can then rename the new section with the same name as the old section.Update the OneNote App
If the sync issues persist, try updating OneNote. That should help fix bugs or other problems preventing the app from working correctly. Using an outdated version of OneNote can also result in the 0xE40105F9 error code.OneNote for Windows 10
1. Open the Microsoft Store.
3. Select the Download button next to OneNote to apply any pending updates. Or, select Update All to update all Microsoft Store-related apps. Learn what you can do if the Microsoft Store fails to update OneNote.OneNote for Microsoft 365
1. Open the File menu and select Account.
2. Select Update Options.
3. Select Update Now.Optimize Notebooks (Microsoft 365 Version Only)
Optimizing your OneNote notebooks in the Microsoft 365 version of OneNote can help fix sync issues caused by overly large storage files. Additionally, deleting the version history and removing unnecessary backups can also tone down the size of a notebook. This issue can also result in the 0xE00015E0 and 0xE0000025 error codes.Optimize Notebooks
2. Select Save & Backup on the sidebar.
3. Select Optimize All Files Now.Delete Version History
1. Select the History tab.
2. Select Page Versions.
3. Select Delete All Versions in Notebook.Delete Extra Backups
2. Select your notebook.
3. Delete the backup files you no longer want to keep. It’s a good idea to keep at least a single backup for each notebook section.Restore Items From the OneNote Trash
Deleted notes are also known to cause sync issues. Try restoring them. Once OneNote re-establishes connectivity, you can delete them again.OneNote for Windows 10
1. Select the View tab.
3. Right-a section or page and select Restore to.
4. Pick the original notebook or section and select Restore.
5. Repeat for any other sections or pages and force-sync OneNote.
6. Delete the restored sections and pages again.OneNote for Microsoft 365
1. Select the History tab.
2. Select the button labeled Notebook Recycle Bin and select Notebook Recycle Bin again.
4. Pick the original notebook or section and select Move.
5. Repeat for any other sections or pages inside the OneNote Recycle Bin and force-sync OneNote
6. Delete the restored sections and pages again.Your Notes Are Now Syncing Again
Although you may have fixed OneNote for now, you’ll likely encounter additional sync issues as you keep using the app. The fixes above should help you again when that happens. Regardless, it’s a good idea to keep OneNote up-to-date on your PC to minimize potential problems with syncing going forward.
The flashlight on your iPhone is a convenient feature you can use when reading in a tent, looking for dropped keys while walking your dog at night, etc.
It may not be as bright as a pocket flashlight, but it creates more than enough light when you need it in a pinch. Unfortunately, a software glitch or bug can cause the feature to malfunction, or a low iPhone battery can prevent the flashlight from working.
Table of Contents
Whatever the case may be, there are a few things you can try when your iPhone flashlight is not working.What to Do When the Flashlight on Your iPhone Is Not Working
You can find your flashlight from the Control Center on your iPhone. If you’ve accidentally removed it, you can quickly add the feature back in the Settings app.
Open the Settings app (gear icon) and tap Control Center.
Scroll to Flashlight under More Controls and tap the Add (+) sign next to it. Flashlight is now part of the Control Center.Charge Your iPhone
If your iPhone’s battery is critically low or your phone is very cold or very warm, the flashlight may not work.
Charge your iPhone fully and make sure it’s down to a normal temperature before trying to use the flashlight again.Close the Camera app
The flashlight may stop working if your iPhone’s Camera app is on. If both are enabled simultaneously, there may be a conflict since the camera flash and the flashlight use the same bulb to work.
Turn off the Camera app and check if the flashlight works.Check the Brightness Slider
The brightness slider helps you adjust the flashlight brightness on your iPhone. If you’ve used your flashlight before and forgot to increase the brightness levels, try to set it back to full and see if the light comes back on.
Just press and hold the flashlight button until it pulls up the brightness slider and then you can adjust the brightness.Update iOS
Sometimes your iPhone flashlight may stop working due to a bug or pending update. You can update iOS and then check whether the flashlight works again.
Note: Before updating iOS, back up your iPhone to iCloud or to your computer.
Next, tap Software Update.
If there’s more than one update, select the update you want to install and then tap Download and Install.Use Siri to Turn On the iPhone Flashlight
If you can’t enable the flashlight via the Settings app, you can use Siri to turn it on.
Turn on Listen for “Hey Siri” and Allow Siri When Locked.
Next, say Hey Siri, turn the flashlight on or Hey Siri, turn on my flashlight. If it works, you can use Siri again to turn off the flashlight.Restart Your iPhone
Restart your iPhone to resolve any bugs or software problems if the flashlight is still not working. This resets some of the temporary settings that cause your iPhone’s features or apps to malfunction. To reset, use the following instructions:
iPhone X, 11, 12: Press and hold the Volume or Side button.
iPhone SE (2nd gen), 6, 7, 8: Press and hold the Side button.
iPhone: SE (1st gen), five or older: Press and hold the top button.Reset iPhone Settings
When you reset your iPhone settings, you won’t lose any data or media.
Note: All settings, including location, network, privacy, and the dictionary and keyboard, will be reset to their defaults or removed.
Tap Reset.Restore Your iPhone to a Previous Backup
Note: This should only be used as a last resort. You should only do this if you have a backup that you can restore or else you will lose all your previous data on the iPhone. You can check the latest backup you have or create a new backup, as shown below.
Tap Settings and then your name at the top.
Tap iCloud Backup.
Select Erase All Content and Settings.
Select Erase Now, and enter your passcode if prompted.
Select Erase iPhone and confirm the action. Enter your Apple ID and password and select Erase iPhone again.
Note: Step 8 erases your data, but it’ll replace it with the iCloud backup.
You’ll see the Apple logo and progress bar on your screen. Once the progress bar completes and your iPhone restarts, sign in to iCloud.
Tap Restore from iCloud Backup in the Apps & Data screen.
Select a backup and follow the on-screen instructions to restore your iPhone from an iCloud backup.
Now you can test whether your flashlight is working.Other Things to Try When the iPhone Flashlight Is Not Working
If none of the above solutions worked, here are some troubleshooting steps to try:
Reset your iPhone to factory settings. Make sure you backup all your data before you reset the iPhone because it’ll delete all your data.
If the flashlight won’t work and the flashlight button lights up, as usual, you may have a hardware issue. Contact Apple Support or take it in for repair. If your iPhone is still under warranty, you can get it repaired for free.
So you have a shiny new HiDPI screen, and you want to use it with Linux. The bad news is there isn’t a one-size-fits-all solution. Each desktop environment handles scaling differently. The good news is there is a way to handle HiDPI displays on each of the major Linux desktop environments.Unity
Unity handles HiDPI displays fairly well, and it’s easy to implement. Open up the Unity “Settings.” It’s one of the default favorite applications. If you changed it, you’ll be able to search for it easily enough.
Towards the bottom of the window is a slider that allows you to scale the interface. By scaling it above “1,” you can increase the size of the display to a point where it fits your display. When you’re happy with your settings, save it.KDE
KDE also handles HiDPI screens well out of the box. Open up KDE’s “Settings.” Like Unity, it should be one of your default favorites. If you changed your favorites, you can still find it under “All Applications” followed by “Settings.” The application that you’re looking for is “System Settings.”
Find “Monitor and Display”. This is the window where you can change your monitor’s resolution and refresh rate. If you’re not running the proprietary NVIDIA drivers, and you haven’t already done so, change these settings to match your monitor.
After you have everything the way you want, log out and log back in. Depending on your system, it might require a full system reboot to take effect.GNOME
The best way to handle setting GNOME up for HiDPI screens is to use GNOME Tweak Tool. If you’re on Ubuntu, it’s already installed. Other distributions have it readily available in their repositories.
Note: Gnome only allows you to set an integer value for the scaling factor. This means that you won’t be able to scale up/down proportionately.Known Issues
GNOME is known to have some scaling issues with the above method. There isn’t any other solution built directly into the GNOME desktop at this time. If you are experiencing poor scaling because of the lack of more fine-grained support, check out the window manager section of this article.
GNOME users who have tried the methods detailed in the window manager section have experienced better results than using GNOME directly. This is because those solutions interact directly with the underlying X server instead of the more complicated GNOME shell. Since GNOME receives its information from X, it will still ultimately affect GNOME.
You might also want to consider saving the options that you arrive at in either the “.xinitrc” file or “/etc/X11/xorg.conf.” This will make them permanent. Chances are you’re running a full-featured desktop for convenience, and you don’t necessarily like having to manually configure everything, especially not at each boot.XFCE
XFCE is easily the worst when it comes to HiDPI support. If you use XFCE, consider changing environments, seriously.
For everything else in XFCE, you might want to consider following the same steps as the window managers.Window Managers
Window managers like i3 can be tricky. They don’t have fancy graphical configurations that you can use to set the display resolution or to scale the display. For that you’re going to have to work directly with the X server.
The first thing that you need to do is set the DPI of the fonts. You can do this through the “.Xresources” file. Add the following block to tell programs that load from “.Xresources” how to handle fonts.Xft.dpi:
0Xft.lcdfilter: lcddefault Xft.hintstyle: hintfull Xft.hinting:
Obviously, set the DPI to match your monitor.
Now, the best way to set the DPI for the X server is xrandr. Just run the command with the --dpi flag followed by the DPI of your screen.xrandr
If you don’t want to run that command every time you boot up your computer, you can add it into your window manager’s configuration to run at startup or even the “.xinitrc” file. Running it in front of i3 in “.xinitrc” would look like the example below.
Adding the line to i3’s configuration file would look like this:
Either way should work. If it still doesn’t, you may need to specify your monitor’s resolution and dimensions in “/etc/X11/xorg.conf” so the X server can accurately determine how to scale everything.Closing Thoughts
None of these solutions are universal. Different applications calculate DPI differently and get their information from different sources. You may have to address applications individually. If you’re having issues with a number of programs, consider following the steps outlined for window managers. Since they directly impact the X server and a lot of programs get their information from the X server, changing those settings might solve a number of problems at once.
Nick is a freelance tech. journalist, Linux enthusiast, and a long time PC gamer.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
Gmail filters is a good way for you to set rules for your email and allow you to organize your inbox without you doing the manual work. Here are a few ways that you can make good use of Gmail Fliters1. Forward all incoming emails and archive them
If you have multiple Gmail accounts, and you really only use one of them, a good way to manage all your emails is to forward all the emails from all the accounts to the primary account. In addition, you can mark the emails as read and archive all of them, so they won’t show up in the inbox.
To accomplish this, create a new filter with @ in the “From” field. (It will work with * as well)
In the next section, you can select “Forward it” as well as “Mark as read” (or “Archive”).2. Auto-reply to Email Using Canned Responses
If you always receive emails from the same user, or have the same pattern (like questions on a particular topic, guest post request, etc), you can compose a canned response and create a filter to auto-reply with the canned response for such emails.
Here’s the guide to setup the filter to autoreply with canned response.3. Sort attachment of various size
The standard filter allows you to select emails with attachment. You can further improve this filter by specifying the attachment size. For example, to add a label “big file attachment” to emails with attachment of more than 10MB:
1. In the search bar at the top of Gmail, type:
Yet another way to customize this filter is to sort attachment according to their file types, something like:4. Configure tabbed inbox emails
For the new tabbed inbox interface in Gmail, Google is the one that decides which email go into which category/tab. By using the filters, you can set your own rule to override the default settings, like emails from Twitter will go directly into “Primary” instead of “Social” tab.5. Quickly organize old emails into label
After you have created a filter, it will only work for future incoming emails. If you already have thousands of emails in your inbox and you only just started out using filters, there is an option for you to quickly apply the filter to all the emails in your inbox.6. Export/Import Filter to new Gmail account
If you have multiple Gmail accounts and you want all of them to have the same set of filters, instead of creating each filter one-by-one in all the accounts, you can simply export from one account and import to other Gmail accounts.7. Send a to-do list to yourself and auto assign it to label
If you have the habit of recording down the things that you need to do, you can simply email yourself with the subject “TODO” and make use of a filter to add “TODO” label to the email.8. Use Gmail as a RSS reader
Using a service like IFTTT, you can easily convert a RSS into an email and have it delivered to your inbox. You can then make use of a filter to assign “RSS” label to the email.9. Create a disposable email address with the “+” alias
For this to work, you have to create the filter:
Action: Delete It Conclusion
There are tons of ways to make use of Gmail filters and we have only scratched the surface. Do share with us the cool filters you have come up with and innovative ways to make use of them.
Image credit: file folder with slots for household expenses by BigStockPhoto
Damien Oh started writing tech articles since 2007 and has over 10 years of experience in the tech industry. He is proficient in Windows, Linux, Mac, Android and iOS, and worked as a part time WordPress Developer. He is currently the owner and Editor-in-Chief of Make Tech Easier.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
Update the detailed information about 9 Amazing Ways To Handle Working on the Daihoichemgio.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!