Trending December 2023 # Does The Dualsense Edge Work On All Ps5 Games? # Suggested January 2024 # Top 20 Popular

You are reading the article Does The Dualsense Edge Work On All Ps5 Games? updated in December 2023 on the website Daihoichemgio.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Does The Dualsense Edge Work On All Ps5 Games?

Does the DualSense Edge work on all PS5 games?

The DualSense Edge does work on all PS5 games, but not in the way you might think

Since the DualSense Edge was announced in August 2023, people have been asking Does the DualSense Edge work on all PS5 games?’. It’s a valid question, if we’re honest, as the gaming community has gotten used to consoles being very much un-customizable, especially as compared to PC.

PlayStation 5 DualSense Edge controller

Weight

335g/11.81oz

Connectivity

Bluetooth, USB Type-C

Additional buttons

2x extra buttons on the back. Choice of levers or half-dome

Battery life

5-10 hours

With a few exceptions, usually helped in no small part by the modding community and their skillful wielding of soldering irons, you can’t customize consoles that much. The software is often even less open, meaning that you’re stuck with how it is, unless the manufacturer, in this case, Sony, decides otherwise.

NOW READ: Is the DualSense Edge compatible with PS4?

This is in stark contrast to PC, where modifications have been ubiquitous for decades now, with being able to rebind the controls as you wish being the bare minimum. Recently, however, consoles have been catching up, with an increasing number of games allowing you to bind the controls as you wish.

Unfortunately, all this has done relatively little to address the lack of available inputs on the humble controller, which has remained essentially unchanged for years in terms of layout. However, industrious companies like SCUF started to create third-party controllers for consoles with additional inputs, usually in the form of paddles on the back.

Finally, after all these years, Sony created the DualSense Edge for the PS5, which is their first attempt at a first-party ‘pro’ controller. However, as we mentioned, consoles are famously closed-off, so, does the DualSense Edge work on all PS5 games? Let’s take a look.

NOW READ: Is the DualSense Edge compatible with PC?

Does the DualSense Edge work on all PS5 games? Yes it does

After testing it for our full DualSense Edge review, we learned that the DualSense Edge doesn’t provide the same kind of per-game customizable keybinds as we’ve gotten used to on PC. You don’t go into the settings of each game, change the keybinds, and go about your way.

Instead, the DualSense Edge provides you the ability to remap any button to any other button, including the additional inputs on the back.

How do the profiles work on the DualSense Edge?

For example, if you’re playing God of War: Ragnarok and you fancy having Atreus fire his arrows without having to move your thumb from the right stick, you can bind Square to one of the paddles on the back. This would then leave Square as an empty input, freeing it up for another button that might suit that location better.

This is done via a menu outside of the game itself and the new configuration is saved to the DualSense Edge controller. You can have up to 4 profiles saved at any time, and you can switch between them with the Fn buttons or via the aforementioned menu.

So, yes, the DualSense Edge works on all PS5 games. Despite the lower flexibility compared to being able to rebind the inputs in each game’s menus, as you can on PC, it’s actually a clever solution. This is because it keeps it at the OS and hardware level, so developers don’t have to allocate resources to add the ability to rebind inputs for each game.

Does the DualSense Edge work on all PS5 games?

Yes. The DualSense Edge works on all PS5 games as it operates on an OS and hardware level, meaning that the game in question doesn’t have to be updated to support it.

How much does the DualSense Edge cost?

The DualSense Edge is available to buy from Sony for $199.99/£209.99.

You're reading Does The Dualsense Edge Work On All Ps5 Games?

How Does Mysql Union Work

Introduction to MySQL Union

MySQL Union combines the output of two or more “SELECT” statements. The output of the “UNION” will be without duplicate rows. The number of fields in the table should be the same, and the data type of the columns should be the same. If you don’t want the duplicate rows to be ignored, we can do it with the “UNION ALL”. In the result set of the UNION table, the column name will be the same as the column name of the first select statement. In this session, let us learn more about the usage of the UNION and let see the examples of it: –

Start Your Free Data Science Course

Hadoop, Data Science, Statistics & others

Syntax

Now let us see the syntax:

SELECT column_1, column_2,...column_n FROM First_tables [WHERE conditions] UNION [DISTINCT] SELECT column_1, column_2,...column_n FROM Second_tables [WHERE conditions]; How Does MySQL Union Work? Table1 create table uniona ( cola INT ); Table2 create table unionb ( colb INT );

Insert data into the tables as below: – Below is for the “uniona” table.

insert into uniona values (99); insert into uniona values (95); insert into uniona values (94); insert into uniona values (93); insert into uniona values (92); insert into uniona values (91); insert into uniona values (99);

Select the items for the table “uniona”: –

select * from uniona;

Let us see the screenshot for the same: –

Insert data into the tables as below: – Below is for the “unionb” table.

insert into unionb values (99); insert into unionb values (34); insert into unionb values (35); insert into unionb values (33); insert into unionb values (32); insert into unionb values (31); insert into unionb values (30); insert into unionb values (29); insert into unionb values (28);

Select the items for the table “unionb”: –

select * from unionb;

Let us see the screenshot for the same: –

Now let us perform union operation on the above tables: –

select * from uniona union select * from unionb;

Select the items for the table “uniona” and “unionb” and perform the union: –

Let us see the screenshot for the same: –

Example:

Now let us perform UNION on three tables as below: –

--Table1: - create table TEST_A ( cola INT ); --Table2: - create table TEST_B ( colb INT ); --Table3: - create table TEST_C ( colc INT ); insert into test_a values (1); insert into test_a values (2); insert into test_a values (3); insert into test_a values (4);

Let us see the columns of the table: –

select * from test_a; insert into test_b values (1); insert into test_b values (5); insert into test_b values (6); insert into test_b values (7); insert into test_b values (8);

Let us see the columns of the table: –

insert into test_c values (1); insert into test_c values (10); insert into test_c values (11); insert into test_c values (12); insert into test_c values (13);

Let us see the columns of the table: –

Output:

Screenshot for the above: –

select * from test_a union select * from test_b union select * from test_c

Output:

Here in the above output, we need to check two things: –

The column name of the result set is the column name of the first “select” statement. Here it is “cola”.

The second thing is that we can see that there is a duplicate row in all the tables of value “1”. But in the result set, UNION ignores the duplicate because we have only one row of data, “1”.

Screenshot for the same: –

Example of MySQL Union

Actual Table:-

create table St_marks ( subject_name varchar(20), marks int ); insert into st_marks values ('English', 98); insert into st_marks values ('Mathematics', 93); insert into st_marks values ('Physics', 78); insert into st_marks values ('Chemistry', 67); insert into st_marks values ('Art', 43); insert into st_marks values ('Music Class', 67); select * from st_marks;

Backup table:-

create table St_marks_bkup ( subject_name varchar(20), marks int ); insert into st_marks_bkup values ('English', 98); insert into st_marks_bkup values ('Mathematics', 93); insert into st_marks_bkup values ('Physics', 78); insert into st_marks_bkup values ('Chemistry', 67); insert into st_marks_bkup values ('Art', 43); insert into st_marks_bkup values ('Music Class', 67); select * from st_marks_bkup;

Output:

A screenshot for the above is given below: –

SELECT SUBJECT_NAME, MARKS FROM ST_MARKS UNION SELECT SUBJECT_NAME, MARKS FROM ST_MARKS_BKUP;

Output:

The screenshot is for the same: –

Conclusion

Things that need to remember are as below: –

MySQL Union combines the output of two or more “SELECT” statements. The output of the “UNION” will be without duplicate rows.

The number of fields in the table should be the same, and the data type of the columns should be the same. If you don’t want the duplicate rows to be ignored, we can do it with the “UNION ALL”.

In the result set of the UNION table, the column name will be the same as the column name of the first select statement.

How Does Clubhouse Waitlist Work?

The virtual world is abuzz with talk of Clubhouse – a new social networking app born in the unpropitious year of 2023. Its distinctive invite system and exclusivity, which could have restricted its growth, has actually made it all the more appealing, like most things in short supply.

On top of that, as it is an audio-only platform, going against the tide of social media apps drowning its users with visual streams, its idiosyncracies have somehow been well received. Also, since Clubhouse is only available on iOS devices (as of now), it is all the more restrictive as to who can join and who can’t.

Now that Clubhouse has gained enough traction to become the next best thing that most people are not a part of (FOMO is real), many are wondering how they can become a part of it. Sure, one can always get an invite from one’s friend(s) who’re already on Clubhouse. But what about the rest of us who’ve signed up and find ourselves way down the waitlist? And how long does one have to wait? Well, here’s all you need to know about it.

What is Clubhouse Waitlist?

There are a couple of ways one can get into Clubhouse – through an invite from someone who’s already got in, or by signing up for the waitlist. But since invites are in short supply, most people resort to the latter.

Basically, it works like this – you sign up for the waitlist and wait for someone to wave you in. It helps to have a friend already on Clubhouse who can do so and save you some time.

It doesn’t consume their invite so you don’t have to holler into the internet void, begging for someone to spend their invites on you.

How much time does Waitlist invite take?

There’s no clear range for how much time one has to wait on average before they’re waved in. Some lucky ones have had to wait no more than a few hours, while others had to wait months to get in. As things can be a little unpredictable and depend on whether any of your friends are existing Clubhouse members, we’d suggest you don’t hold your breath over it.

Do you surely get an invite via Waitlist?

Whether or not you can get into Clubhouse through the Waitlist (even after long periods of waiting) is not a matter only of time alone. One of your friends has to already be a part of Clubhouse for them to know that you’ve signed up for the waitlist. Once you’ve signed up on the waitlist, the Clubhouse algorithm will then identify your contacts that are already inside and send them a notification to waive you in. So, as the circle grows, there is a definite possibility that you will (eventually) become a part of Clubhouse.

Are there better ways to get an invite than Waitlist?

The most obvious way to get into Clubhouse, as we’ve mentioned before, is to get an actual invite from someone who’s already “in”. Most celebrities and famous influencers won’t have to go through much of a struggle to get an invite, but regular folk might have to wait until someone remembers to send them one. But there are a few other ways you can get an invite.

Via Forums

Clubhouse has “rooms” where people that share similar interests can come together and share their insights (or simply listen). This means that if you can connect with them, you might be able to get an invite to their Clubhouse chat rooms.

The best way to do so is to connect with Clubhouse users on other platforms and exchange contacts. If you can befriend enough existing Clubhouse users, you will have a higher chance of getting in when Clubhouse’s algorithm scans your contact list, find people that are already in, and send you an invitation.

There are multiple subreddits with Clubhouse users that may just be kind enough to get you in. Just drop a message in the community thread and say precisely why is it that you want. There are some who may share their invites for free, but a great majority of them will ‘sell’ them.

As there’s a real dearth of invites, a real Clubhouse invite-market has surfaced where people can spend a few bucks to become a part of Clubhouse. Similar listings are also seen on eBay, Craiglist, and buymeacoffee pages, but be wary as some of them are out there only to swindle you off of your money. Make sure you chat with the person who’s selling the invites and only pay if you think they’re authentic.

Many have also started a chain of free invites where one Clubhouse user sends an invite to someone who goes on to invite two more (as every Clubhouse user gets two invites in the beginning), and then two more, ad infinitum.

Via Social Media

Facebook and Instagram are one of the biggest social media platforms and it is very likely that you may come across people who are already on Clubhouse. Using hashtags such as #Clubhouseinvites or #Clubhouse and finding specific Clubhouse groups can speed up the process and get you in touch with Clubhouse users. All you have to do is to request them for an invite and, if they’re willing enough, they may share it with you.

Has anyone got an invite via Waitlist?

Yes, there are many who’ve got an invite via Waitlist. If that were not the case, Clubhouse wouldn’t have had the Waitlist method in place.

Just because it’s taking a long time to get in through the waitlist doesn’t mean that you won’t get in eventually. Make sure that you interact with people who’re already on Clubhouse and exchange contacts with them so that the algorithm can find you quickly.

Why I can’t join Waitlist?

If you’re not able to join the Waitlist, then it means that the waitlist is down for the moment.

You can check back in a couple of weeks and see if it’s up again. Until then, make sure that you get in touch with other Clubhouse members on forums or social media platforms to improve your chances of getting in once you do get to sign up for the waitlist.

Being an audio-only social media app, Clubhouse has seen a surprising jump in popularity with every other iOS user wanting to get in and be a part of the new fad. Just do what’s necessary, be patient, and you will get your invite soon enough.

How Does Performance Management Work?

What is Performance Management?

Performance management is a communication-based process between a supervisor and an employee occurring throughout the year, to plan, monitor and review the employee’s performance, objectives, goals, and overall contribution to the organization. Essentially, performance management is what organizations undertake to increase their success and maintain a competitive edge.

Performance management is often categorized into two types; they are as follows −

Corporate Performance Management

Human Performance Management.

Corporate Performance Management

Corporate Performance Management (CPM) is defines the methods, metrics, and processes used to monitor and manage the business performance of an organization. CPM strategically focuses on information to operational plans in order to receive aggregated results. It does not concern about human performance unlike Human Performance Management.

Corporate Performance Management (CPM) uses intelligent business tools to formulate organizational strategies through data analysis, processing, and reporting to monitor and manage the performance of an organization. In other words, it helps corporations to improve their business management through various proven and tested business methods.

Human Performance Management

Human Performance Management (HPM) refers to employees’ productivity along with their operational capabilities. HPM focuses on psychological processes that contribute to employees’ performances at the workplace, on both individual and team level.

HPM aims to ensure the level of satisfaction of the employees at the workplace, thereby helping organizational strategies in achieving fruitful results in the most rewarding and efficient way possible.

HPM tries to find out the best ways to enhance human performance at the workplace. It focuses on how to manage humans or employee behaviors towards goal accomplishment rather than the controlling their performances.

Performance Management is primarily concerned with the following issues −

Outputs, Process, And Inputs

Planning

Measurement and Review

Continuous Improvement

Continuous Development

Communication

Stakeholders

Transparency

The main aim of performance management is to foster an environment in which people and teams take ownership of their development and that of their companies. Specifically, performance management is concerned with accomplishing individual goals under corporate settings and ensuring that each employee works toward these.

What are the Characteristics of Performance Management?

The primary characteristics of performance management are as follows −

Reward and Encouragement

Performance Management focuses on empowering, encouraging, and rewarding employees to achieve their highest level of work efficiency for company’s benefits.

Performance Aligning with Company’s Moto

It aims to concentrate on the employee’s performance and aspirations aligning with the organization’s moto. Monitoring performance and assigning tasks for constant action as necessary.

Data Analysis and Reporting

Performance management involves Data analysis and regular reporting of projects progress as well the employee performances in various departments, thereby identifying areas for improvements.

Continuous Adaptable Process

Performance management is a constant and adaptable process involving managers and those they supervise collaborating within a framework that outlines how they may work most effectively to accomplish the desired objectives. This implies to constant and effective communications between the managers and the employees.

Based on Agreement and Collaboration Principles

It is founded on the notion of contract- and agreement-based management rather than command-and-control management. It is based on agreement and collaboration rather than on compulsion or control.

Concentrates on Planning and Enhancement of Future Performance

Performance management is concerned with planning and enhancing future performance rather than with Retrospective Performance Review. As mentioned previously, it is a continuous and evolving process in which performance improves over time. It is the foundation for providing regular and frequent trainings, guidance, and resources on several requirements.

Transparency in Monitoring Own Performance

The most interesting part in performance management program is that the employees can monitor their own individual achievements and progresses to know how they are contributing to the overall accomplishments of the company.

One can use software to track these goals and monitor the performances. This makes it easier to highlight and reward the exceptional performers in the team. This would also make the hard-working employees feel valued for their efforts.

Conclusion

Every company wants to guarantee that its personnel expenditures are reasonable. When performance management is performed successfully, it is easy to analyze workforce’s daily productivity and find areas where they are not doing as well. This may assist in increasing the efficiency of the employee’s personal development, unlocking his or her latent potential, and ensuring that employees are worth every rupee.

How Does Commit Work In Oracle?

Introduction to Oracle COMMIT

The Oracle commit statement is used to end the current transaction and make it permanent whatever changes that were applied to a particular database during this current transaction (Transaction in Oracle database can be defined as a sequence of SQL statements that is treated by the database as a single unit) and also releasing the transaction locks and deleting all the checkpoints or savepoints created during the current transaction process and after the successful application of this COMMIT statement users are able to see the changes made in the database.[Text Wrapping Break]

Syntax:

Start Your Free Data Science Course

Hadoop, Data Science, Statistics & others

We will look into the syntax of the COMMIT statement. The syntax is very simple for the COMMIT statement.

Let us now understand the various parameters used in the COMMIT clause.

Parameters of Oracle COMMIT

Below are the Parameters of Oracle COMMIT:

1. WORK: It is optional. In simple terms, a COMMIT WORK or only COMMIT are equivalent and does not change the outcome.

3. WRITE Clause: This clause is also optional and this clause in itself has two parameters which are given below:

WAIT: It is the default setting. It means that the commit will return back to the client only after redo information is persistent in the redo log.

NO WAIT: This means that the commit will return back to the client irrespective of the status of the redo log.

4. FORCE Clause: Just like the above parameters even this one is also optional. This allows us to manually commit a corrupt transaction. The syntax for using FORCE clause is FORCE ‘string’, [integer]: To commit such in doubt or corrupt transactions we need to get the id of such transactions, In order to achieve that we need to query the DBA_2PC_PENDING. In case we want to commit a corrupt transaction by giving the transaction id in single quotes we can use FORCE CORRUPT ‘string’. If we want to commit all corrupted transaction we can use FORCE CORRUPT ALL.

How COMMIT Works in Oracle?

Let us now understand how commit works in Oracle. A commit is used on a transaction to apply it into the database which means the database is altered. It can be used implicitly as well as explicitly. A transaction is an atomic unit which consists of one or more logical unit. So suppose transaction (consisting of SQL statements) increments the value in a savings account of a person stored in the oracle database. The changed data gets reflected after we commit the SQL statements. So, in this case, we are explicitly committing the statements but if we use any DDL statements like CREATE table then oracle implicitly commits the transaction. So in case of DML statements we have to commit explicitly. So, we can say that commit means user explicitly or oracle implicitly in case of DDL statements requests that the changes made by the transaction be made permanent in the database.

Examples to Implement COMMIT in Oracle

Let us now look at the below examples to understand better the COMMIT statement.

1. IMPLICIT COMMIT

In this case, the database will implicitly commit in case of a DDL statement. In our case, we are going to create a new table named DEPARTMENT having three columnsdept_id,dept_name. Let us look at the query.

CREATE TABLE DEPARTMENT (dept_id VARCHAR2(25) PRIMARY KEY, dept_name varchar2(25) NOT NULL);

This query will be implicitly committed and we are not required to explicitly commit the transaction since it is defining a table structure in the database also known as DDL statement. Let us run the query in SQL developer and look at the result.

2. EXPLICIT COMMIT

In the first example, we are going to use the simple commit statement to insert a row into the Customers table which consist of three columns. Let us look at the query for this.

Query:

COMMIT;

In the above statement, we are first using the DML statement and then explicitly using COMMIT to make the insert permanent.

Let us run the group of statements in SQL developer and look at the result.

If we see the above screenshot after the insert statement is executed the commit command is also executed.

3. COMMIT with COMMENT Clause

Query:

Let us run the statements in SQL developer and look at the result.

As we can see in the above screenshot the statement has been successfully committed.

4. COMMIT Using FORCE Clause

Let us now apply the FORCE clause for doubt or corrupt transaction. To manually commit the corrupt transaction we will first query the table DBA_2PC_PENDING to find the transaction id of the corrupt transaction and then use the FORCE clause to commit it. Let us look at the query for the same.

COMMIT FORCE ‘12.10.12’

This, when executed, will force COMMIT of the corrupted transaction with id ‘12.10.12’.

Conclusion

In this article, we discussed the definition of the COMMIT statement and its syntax. We also discussed how the COMMIT works with various transactions. Later on, we discussed a few examples based on various cases to understand better.

How Does Typeof Work In Typescript?

Definition of TypeScript typeof

typeof in TypeScript has the same name as JavaScript but functions differently. typeof is used to differentiate between the different types in TypeScript. By the use of typeof we can differentiate between number, string, symbol, Boolean, etc. typeof can be used with any type in TypeScript; by the use of it, we can re-use the code by passing any parameter type. In the coming section, we will see more about the typeof in TypeScript to understand it better.

Start Your Free Software Development Course

Syntax:

As we know, typeof is a keyword that is used to deal with different types in TypeScript. Let’s see its syntax in detail for better understanding. See below;

typeof variable === "your_type"

As you can see in the above line of syntax, we can directly use this typeof with the variable name which we want to calculate. After this, we can write our own logic as per the requirement. In the coming section of the article, we will discuss this usage in detail for better understanding.

How does typeof work in TypeScript?

As we already know that typeof is used to deal with several types of typeof in TypeScript. This allows us to help us with the various type in TypeScript; we can reuse the same code for multiple types in TypeScript. In this section, we will see how to use this while programming in TypeScript. Let’s see its usage and understand it better for future use. See below;

Keyword usage:

typeof variable_name

In the above lines of code, we are using typeof keyword with the variable. It will tell us the type of variable. After this, we can use this to perform any operation on it. Now see one sample example for typeof in TypeScript for beginners to understand its internal working. See below;

e.g. :

class Demo{ testFunction(val: any): any{ if(typeof val === "string"){ return val; } } } let demoobj = new Demo(); let result= demoobj.testFunction("i am string !!"); console.log(result);

In the above example, we are creating one function which accepts any type of parameter. Inside the ‘Demo’ class, we have created one function named ‘testFunction’. Inside this function, we are using typeof keyword to compare the type of the variable being passed. typeof will return us the type of the parameter. This is similar to the instanceOf keyword already available. After the comparison, we can write our own logic as per the requirement. At the last to call the function in TypeScript we are creating an object of the class and calling the function. This function we have created takes one parameter; this parameter can be of any type because we have assigned the type as ‘any’ in the function declaration. This is how it works in TypeScript, like any other programming language. It has some benefits as well. Let’s discuss them each one by one;

1) By using typeof in TypeScript, we can easily make checks which can help us to get any exception further exceptions if we try to cast them incorrectly.

Examples

In this example, we are trying to use the typeof with numbers in Typescript; if the passes parameter matches with the string type, then it will return the value; otherwise, nothing will be printed.

Example #1

Code:

class Demo{ testFunction(val: any): any{ if(typeof val === "string"){ return val; } } } console.log("Demo to show the usage of typeof in Typescript !!"); let demoobj = new Demo(); let result1 = demoobj.testFunction("i am string !!"); let result2 = demoobj.testFunction("i am string two !!"); let result3 = demoobj.testFunction("i am string three !!"); console.log("printing result of the function after typeof !!"); console.log("result one is::" +result1); console.log("result two is::" +result2); console.log("result three is::" +result3);

Output:

Example #2

In this example, we are trying to use the typeof with numbers in Typescript; if the passes parameter matches with the number type, then it will return the value; otherwise, nothing will be printed.

Code:

class Demo{ testFunction(val: any): any{ if(typeof val === "number"){ return val; } } } console.log("Demo to show the usage of typeof in Typescript !!"); let demoobj = new Demo(); let result1 = demoobj.testFunction(100); let result2 = demoobj.testFunction(400); let result3 = demoobj.testFunction(500); let result4 = demoobj.testFunction(500); let result5 = demoobj.testFunction(500); console.log("printing result of the function after typeof !!"); console.log("result one is::" +result1); console.log("result two is::" +result2); console.log("result three is::" +result3); console.log("result four is::" +result4); console.log("result five is::" +result5);

Example #3

In this example, we are trying to use the typeof with numbers in Typescript; if the passes parameter matches with the boolean type, then it will return the value; otherwise, nothing will be printed.

Code:

class Demo{ testFunction(val: any): any{ if(typeof val === "boolean"){ return val; } } } console.log("Demo to show the usage of typeof in Typescript !!"); let demoobj = new Demo(); let result1 = demoobj.testFunction(true); let result2 = demoobj.testFunction(false); let result3 = demoobj.testFunction(true); let result4 = demoobj.testFunction(false); let result5 = demoobj.testFunction(true); console.log("printing result of the function after typeof !!"); console.log("result one is::" +result1); console.log("result two is::" +result2); console.log("result three is::" +result3); console.log("result four is::" +result4); console.log("result five is::" +result5);

Output:

Conclusion

In the typeof keyword easy to use and understand. We can easily check the type of the parameter by simply using the typeof keyword before the variable name. This is very handy to use with variables in TypeScript. We can compare integers, numbers, Boolean, symbols, undefined, strings, objects, etc., by using typeof in Typescript.