Trending February 2024 # How To Fix Battery Problems After A Software Update # Suggested March 2024 # Top 10 Popular

You are reading the article How To Fix Battery Problems After A Software Update updated in February 2024 on the website Daihoichemgio.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 How To Fix Battery Problems After A Software Update

Software updates are the only way to change or improve the user experience of a device you intend to keep for a couple or so years and whose hardware cannot be upgraded. This is primarily why we go crazy when our Android devices don’t get regular updates.

However, it’s not always that software updates bring the good stuff. In some cases, you may end up with a terrible experience after a software update, major or minor. Issues may vary from one user to another, but one of the most common problems is excessive battery draining.

So, how do you fix battery problems after a software update? Let’s find out.

Factory reset

Wait, do not try this right away! Try the other solutions give below because this method will remove all your apps and data from the device. Why we have covered this at the top, then, you may ask. Well, that’s because you need to know that this is the most trusted solution to fix the battery drain after the update.

If wiping the cache partition still doesn’t fix battery problems after a software update, your very last option is to do a full factory reset. This will erase every app installed on your phone and their data/files, leaving behind a phone that feels like new.

Since everything stored on your phone will be wiped, a backup before performing a factory reset is necessary, unless you don’t mind losing the stuff on the phone. When fully backed up, follow these steps to factory reset your Android phone.

Open Settings app.

Scroll to the Backup & reset option.

Tap on Factory data reset.

In the new window, tap on Reset phone/Erase everything to complete the process. Provide your PIN/Password/Pattern if prompted to.

Your phone will finish resetting the phone and restart.

Alternative: You can also reset the device from the recovery mode, which is helpful if the device is not responding well, and thus you are unable to reset using the guide above.

You can then restore your backed-up data to the device during setup or simply set it up afresh.

Even though factory reset is recognized as the ultimate solution to fix all the problems, including that of battery drain, it can’t help fix really poor software. For example, Samsung recently rolled out May security patch (build ASE5) to which caused not only the battery drain but also left the device nearly unusable. In this case, even the factory reset didn’t help a lot. Thus, it was only when Samsung fixed the bugs in another update called ASE6, further fixed by build ASE7, did things go completely normal.

So, if none other tips and tricks do you any good, maybe its something related to the entire Android system that’s beyond your control. If that’s the case, a bug-fixing software update from your device manufacturer is what you need to fix the battery problems after a major software update.

Usually, smartphone vendors may respond with fixes depending on how vast the issue is, so be sure to report in your respective device/OEM forums and other popular forums like Reddit and XDA Developers. This ensures the issue is picked up quickly by the companies in question.

Force restart the phone

Before taking any drastic measure, you’d be surprised at what restarting your phone could do to the battery life. Yes, you can easily restart the phone through the usual method of pressing the power button and then select restart on the menu, a force restart is what you need to do here.

On top of fixing your battery draining issue and others, force restarting your Android phone can go a long way to prevent new problems from developing by refreshing the system, which also improves performance.

To force restart your Android phone, simply press and hold the power button for approximately 10 seconds (or until you hear the phone vibrate) and release it.

The phone will reboot normally without affecting any of your files and settings.

Check the battery usage stats

If your Android phone is experiencing excessive battery drain after a software update, the first thing to do is check battery usage stats. But this will mean you use the phone from full charge to near empty in order for the battery manager to gather enough usage stats.  

Here, you can check usage stats for individual apps and hardware components like display screen, wireless connections, and more.

If you find a particular app that is consuming more battery than usual, you should try force stop it first of all from the app info screen. And then update the app is an update is available for it in the Play Store. You can also clear the apps’s cache, or even storage if that doesn’t help. Lastly, if all of this doesn’t help, you may want to uninstall the app.

Battery Saver

Most Android phones come with a built-in battery saving mode that when activated, it will kill all background processes running unnecessarily, but it may also slow down your phone.

Yes, turning on the battery saver will add more hours to your usage time, but it will also limit the full functionality of your device.

Accessing the battery saver mode isn’t the same on all Android devices, but regardless of the model, you should find this setting inside the battery settings. Some OEMs like Xiaomi go an extra mile by giving users more control over the battery saving mode, including things like scheduling.

In case of any battery hogging apps based on the stats above, make sure they are updated to the latest versions available in the Google Play Store and if this doesn’t work, simply uninstall them and find their alternatives to use until the issue is fixed.

Tweaks to the display screen settings

Samsung Display Settings

Display battery saving on Samsung

OnePlus Display Settings

Display battery saving on OnePlus

If your device allows tweaking of the screen resolution, like in the case of Samsung Galaxy S10, don’t hesitate to switch to a lower resolution. This will save you a lot of battery juice and so will a lower screen brightness.

Others like OnePlus 7 Pro allow switching from one screen refresh rate to another. With a higher refresh rate, you’ll enjoy a fluid system with some great transition animations, but this comes at a cost of high battery usage.

Disable unused functions

It’s possible that your phone has things like Wi-Fi, Bluetooth, mobile data, Nearby device scanning, and location always enabled even when not in actual use. Make sure to turn off any function or feature that isn’t in active use to save more battery juice.

Furthermore, you might want to turn off functions like Google Assistant and Bixby (for Samsung users) if you don’t really rely on them for your day-to-day use.

Restrict background usage

In the latest Android OS versions, you can restrict individual app background activity for those that are proving to be battery hogs. Of course, you must first identify these apps by going through the usage stats.

You may also turn on Background restriction for some apps, but note that this will affect things like notifications alerts from working properly.

Uninstall or kill background apps

You can check and kill apps that run in the background to improve battery life on your Android phone. This is regardless of whether you’ve just updated the device or not. Make no mistake, some apps must run in the background in order to perform better, but this also means they use too much battery juice.

A list of your installed apps will be populated from which you can tap on any app to open a new screen for specifically managing the app in question. Here, there are options to Force Stop or Uninstall the app.

Wipe partition cache

A corrupted or outdated system cache can be the cause of many problems after a major software update and not just battery drain issues. By wiping the partition cache, you’ll be refreshing the system cache and in the process curing most of these issues, if not all.

To wipe the partition cache on your Android device:

Turn off the device.

When turned off, press and hold the power and volume up buttons simultaneously.

Release the keys when you see an Android logo on the screen. This is the recovery mode.

From the on-screen options, use the volume down key to scroll to the Wipe cache partition option and hit the Power button to select this option.

If prompted, use the volume down button to highlight Yes and then hit the power button to accept the process.

The system will wipe the cache partition.

When done, select the Reboot system now option using the power button to restart the phone.

Let us know which solution form the above worked out well for you?

In case you are still not able to solve the battery drain problem occurring after installing a software update, then let us know which device you have and what is the latest update you installed. 

You're reading How To Fix Battery Problems After A Software Update

How To Fix Common Smartphone Problems

We may earn revenue from the products available on this page and participate in affiliate programs. Learn more ›

No one likes a faulty smartphone. When you keep your whole life (more or less) on a device, you need that gadget to always function properly. Unfortunately, bugs, crashes, and other issues are inevitable, especially as your phone gets older.

The good news is many of the most common issues have relatively simple fixes you can perform yourself. The bad news is that this will not always be the case. If these solutions don’t do the trick, we’re sad to tell you that you might have to take your handset to a professional repair shop, or (gasp) upgrade to a newer model.

But before you start panicking, take a deep breath—the solution to your problem might be just a few taps away.

A couple faulty apps

If your phone is slowing down it might not be because of a general issue, but simply due to a few bad apples. Figuring which one it is could save you a trip to the shop and a few bucks. If it’s only a few apps, you might be able to repair the situation by deleting the data they store on your phone.

On Android, open Settings, go to Apps & notifications, choose the troublesome app, and tap Storage & cache. Here, you have two options. First, try choosing Clear Cache to erase only the temporary files that the app has stored on your phone. (When these grow too numerous or become corrupted, they can mess with the app’s speed and power.) Clearing the cache won’t mess with the app’s settings, but it may not be enough to solve your issue.

If this doesn’t help, select Clear Data to erase all the app’s information and start from scratch. Clearing the data offers a more comprehensive option, but you may have to re-enter your information afterwards, such as your username and password.

On iOS, you won’t get the same data-clearing options. Instead, you must uninstall and reinstall your app. Find its icon, press and hold it, and then tap Delete App option from the drop-down menu that appears. Then find it in the App Store and reinstall it. This will wipe all the locally stored data, and the app will boot up from scratch. If you want to delete a bunch of apps at once, press and hold one app and continue holding after the drop-down menu appears. One or two seconds later, all the app icons will start shaking and small gray X’s will appear on them. Tap the X to delete.

If you’re still experiencing issues with an app even after uninstalling and reinstalling it, it might be time to do some research on whether you’re dealing with a known problem, or contact the developer directly with the details of what’s going on. Remember to include a thorough description of your issue, the manufacturer, and model of the device you’re using, plus the OS version it’s running. You can usually find developer contact details on the app’s online listing.

Widespread bugs

What’s that, Timmy? Screen froze again and you can’t procrastinate homework anymore? EdZbarzhyvetsky via Depositphotos

If general issues keep appearing almost at random in all kinds of apps, it’ll be harder to pin down one root cause. Perhaps a hardware component is failing, the device is overheating too often, or an upgrade didn’t work correctly. But you won’t actually need to diagnose your phone to fix it.

The old fallback of turning your device off and on again can sound a little obvious, but it can easily solve a variety of problems. This works because it clears out everything in your phone’s temporary memory, so if a couple apps are making the whole phone go haywire, it might be enough to get your device working again.

If the phone has frozen and you can’t power it off in the normal way, try a special hardware reset combination. To figure out just what buttons to press and hold in order to force a reset, look up your phone’s make and model online. You can easily find instructions for Google’s Pixel phones or Apple’s numerous iPhone models.

If the off-and-on-again failsafe fails, it’s time to indulge in some detective work. Unexplained crashes can be caused by an overheating phone, so monitor its temperature while you’re using and charging it. If it’s often hot to the touch, the issue might lie with a faulty charger or a battery that’s on its last legs.

A lack of local storage space can also cause random bugs and crashes, so check how much free room is left on your device. On Android, open Settings and head to Storage. On iOS, open Settings, then tap General and iPhone Storage. If you’re running out of space, you need to make some room. Most phones have their own way to help you free up space, but if yours doesn’t, check out our guide for it.

As a last resort, you may want to consider resetting your whole phone back to its factory settings, which means wiping off all the data and setting it up again as if it were brand new. If the problem persists after that, you’re probably looking at a hardware fault. To deal with that, scroll down to the “Troubleshooting and other issues” section below.

Poor battery life

TFW you run out of battery and still aren’t sure where you’ll be meeting your date. Nicomenijes via Depositphotos

To some extent, everyone struggles with battery life, no matter how new their phone is. But when your charge drops by half in just a couple hours, you’re in trouble. This can happen when a battery gets old and starts degrading fast. If this is the case with your phone, you should look into getting the battery professionally replaced. This will make sense if your phone is relatively new, but if you carry an old handset around, you may be overdue for an upgrade. Just don’t forget to recycle your old one once you get a new one.

While you’re poking around the Battery menu, you can enable battery saver mode, called Battery Saver on Androids and Low Power Mode on iPhones. Turning this on won’t fix your underlying problems, but it can give you a bit more time between charges.

Poor reception

Sometimes you don’t even have to be in the middle of nowhere to lose cell reception. Sometimes your phone thinks your living room is the middle of nowhere. elvinstar via Deposit Photos

Your phone is not always to be blamed if it’s having networking issues that make it difficult to connect to Wi-Fi or catch a cellular signal. The culprit could be external—maybe you are in a notorious dead spot where no one can get any signal, or you’re at home and other devices are also struggling to connect to the web. If this is the case, you might need to focus your troubleshooting on something other than your handset.

A call to your carrier or internet service provider—if you can bear it—could be the next step in trying to get everything working again. They will know more about the issues specific to your phone and service. Alternatively, try a quick web search using the make and model of your phone and the name of your carrier or internet provider. You might find solutions from people who’ve had the same problem as you.

For persistent issues, make sure you’re running the most recent version of your mobile operating system. This will have the latest bug fixes and be ready to work with the latest settings from your carrier or router. If you’ve been putting off an operating-system update, deal with it now.

If both the reset and the update fail, you’ve exhausted your home-repair options. Connectivity is one of those features that should “just work,” so if it doesn’t, you may be looking at a faulty phone, a damaged SIM card, or a problem with the network itself. If the issue started suddenly, and not because you altered any settings on your phone, it’s likely that your phone isn’t to blame. In this case, you’ll definitely want to call the experts at your phone’s manufacturer or your service provider.

Troubleshooting other phone issues

Don’t be scared—if you back up your data, a good old factory reset is nothing to be afraid of. Vadymvdrobot via Deposit Photos

If you’re having problems that aren’t specifically mentioned here, you might be able to dig up some solutions online. Just be sure to choose specific keywords that include your type of phone and the exact problem that’s plaguing it. Otherwise, you’ll encounter thousands of results of varying relevance.

Beyond that, your last resort can be a full phone reset. This process will return your phone back to its original factory state, so if it’s still buggy after that, you’re probably looking at faulty or failing hardware. Resetting a phone isn’t too difficult—just be sure to back up all your important information first, because the reset will wipe all of it.

On the most recent versions of stock Android, you’ll need to head to Settings, then tap System, Advanced, and Reset options. Hit Erase all data (factory reset) and confirm your choice. Before the process starts, you’ll see a brief summary of what’s going to get wiped. For more details, including some tips on back-ups, look at Google’s official guide. If you’re using a non-stock version of Android, the procedure might vary slightly, but the reset option should be easy to find in Settings.

On iOS devices, you’ll need to open Settings, go to General and Reset, then tap Erase All Content and Settings. Then, you’ll need to enter your passcode or Apple ID and password to confirm your choice. Apple has a comprehensive guide on this, and another one if you want to reset your phone using iTunes on a computer.

Remember‚ you’ll need to know your Google or Apple account details to set up the phone from scratch again. And if you’ve enabled two-step verification on your accounts, you’ll need a backup method for verifying your identity—something that doesn’t involve your recently-wiped phone. It might sound like a fiddly process, but it won’t take too much time. Ultimately, the factory reset is the most comprehensive option for fixing a range of persistent device bugs and issues.

Not Receiving Notifications After The One Ui Update? Here’s How To Fix This

Notifications are often really helpful in keeping us in sync in real time with the outside world — chats, messages, missed calls, reminders, emails, whatnots. They bridge an important gap between the info already becoming available and manually getting the info only after opening the app.

While notifications can get pretty distracting at times, fortunately, users have multiple options to turn off notifications at a certain time or from a certain application. But normally, you want to receive notifications in a timely fashion, unless you knowingly disabled it manually for a certain app or apps.

But unfortunately, users of the new One UI skin, a cherry on top of Samsung’s Android Pie update that is, are suffering from a problem where they can’t seem to get notifications from their favorite apps. That this is happening only after they have upgraded to One UI makes it clear that this is an issue with One UI, not the device.

FYI, Samsung’s One UI update is based on Android 9 Pie OS from Google, which by itself brings along a few improvements to help improve how notifications work. The One UI update is now available for the Galaxy S9/S9+, Galaxy Note 9, Galaxy S8/S8+, and the Galaxy Note 8.

So without much further ado, let’s check out how to solve the notification issues after updating your Samsung device with the new One UI update.

How to bring back missing notifications from apps

Android 9 Pie for the Galaxy devices brings along a couple of battery enhancement features wherein the system may put an app to deep sleep, restricting any background activities whatsoever to save the battery life. This can be the cause of app no longer able to update itself in the background and thus not sending you notifications.

This is a common practice, and we often hate Huawei for this, who do this very aggressively. Samsung doesn’t, but in case it is so happening that you have stopped receiving notifications from apps, here’s how to fix it.

To prevent the battery enhancement feature from preventing apps from getting updated and thus notifying you, here’s what you would have to do.

Now tap on Device care and then select Battery.

Tap on the 3-dots icon and select Settings.

If you rely on certain apps simply for notification without using those apps, then you might have to turn off the Adaptive battery feature since it automatically limits battery usage of unused application which prevents the app from displaying notifications.

However, if you use the apps often yet still aren’t receiving notifications, then we’d suggest checking out the Sleeping apps list.

Simply tap on Sleeping apps and then check out the list and see if the app you’re not receiving notifications on is in the list.

In case the app in question is present in the Sleeping apps list, then this could be the reason why you aren’t receiving notifications from the app. To remove the app from the Sleeping apps list, press and hold on the app(s) in the which you aren’t receiving notifications from and then tap on Remove.

Now you should begin receiving notifications from the application as usual. However, if you still aren’t receiving notifications, then you might have to use the workaround mentioned below to solve the problem temporarily until Samsung releases an official update to fix the issue.

Temporary workaround for not receiving notifications

Tap on the 3-dots icon at the top right of the screen.

Tap on BadgeProvider and then tap on Force stop.

You would now have to restart your device.

Press and hold the Power Key.

Tap on Restart.

Once the device restarts, you would begin receiving notifications as usual; however, you might have to perform the same steps every now and then since the notifications might automatically stop once again.

Related:

Why Is There A Black Screen After Bios? How To Fix It

So, maybe you just updated your BIOS through your manufacturer’s website, and maybe now, the Windows screen won’t load, and youre left with only a black screen.

This is a fairly common issue that many users have faced at one time or the other. And most of the time, it’s either because of an improper BIOS update or due to a damaged motherboard. Black screen after BIOS is a confusing issue, mainly because youre left with no GUI and no instructions at all.

If you can somehow access the safe mode, youre in luck, as a fresh Windows installation or a startup repair can fix your problem. However, this will not be the case for a majority of users and in this scenario, you have to resort to other methods. 

Fortunately, you’re in luck as this guide is prepared just for you. We have listed all the possible ways through which you can fix your black screen and return back to Windows normally. So, continue till the end to understand and troubleshoot your problem. 

Corrupted peripherals

Corrupted display drivers

Corrupted MBR

Power supply problems

Overheating

Black screen after BIOS should be taken as a big deal because most of the time, you don’t even know what exactly caused it to happen.

However, we have listed all the fixes you can follow to try and solve your problem. If one method doesn’t work for you, be sure to follow every last one until the end.

First thing’s first, check if your system is responsive or not. If it’s not responsive, then that’s a totally different problem. However, if it is, then there’s usually something we can do about it. 

So, press Win + Ctrl + Shift + B on your keyboard and notice if you hear a beep or not. If your computer is responsive, then you’ll hear a beep because the aforementioned key combination restarts your graphics driver. 

Whenever you face the problem of a black screen on your system, before diving into complicated steps, ensure that your monitor and cables are connected properly. So, unplug your monitor and firmly plug it back on again.

Furthermore, you can also check using a different monitor/cable and a different connection method (for eg. switch to DisplayPort instead of HDMI).

If it’s an external peripheral that’s causing the issue, this method shall help you detect and fix your problem. So, follow the steps shown below:

A faulty and misbehaving graphical processing unit can often cause the screen to go black on your system. GPUs can crash when it is dirty, damaged, or overheated. This is not an unusual scenario and in this case, you should first remove your graphics card and see if the screen lights back up.

Luckily, we here have a dedicated article on how to remove your graphics card the right way. So, have a look at this guide to fix your issue.

Black screen after BIOS usually means that your BIOS update failed halfway through. So, if that’s the case, resuming your BIOS update is the only way to move forward.

Listed below are the exact step to continue your BIOS update with three different cases. So, depending on what’s going on in your system, follow the steps shown.

If the Screen Is Completely Black

If the screen in front of you is completely black, without any letters or options, removing your batteries and reattaching them could help you fix your problem.

However, this method only works if your system has removable batteries. So, considering this, follow the steps below:

Turn off your computer.

Unplug your AC Adapter.

Hold the power button for about 40 seconds to dissipate the remaining electricity from your system.

Remove your battery.

Now, reattach the battery, plug the AC Adapter back on and turn on your computer.

Now, the BIOS update shall be automatically resumed. 

Do Not remove the AC adapter or interfere with the update process until it completes. 

If Your System Restarts and Displays Some Instructions

In case your computer restarts and returns you with three to four steps of instructions, then follow the steps shown below to resume your BIOS update:

With the help of another system, download the BIOS file depending on your computer’s model.

Copy this file on your USB, in the root directory. The USB file format should be FAT32. 

Now, turn off your computer and then, hold the power button for about 15-20 seconds. 

Plug in your AC Adapter. 

Insert the USB drive with the BIOS file.

Now, turn on your computer. The BIOS update process shall now be resumed. 

If Your System Restarts and Displays Texts With a Yes/No Option

In case your computer restarts and displays texts with yes/no options, then follow the steps shown below to resume your BIOS update:

Startup repair is a feature provided by the Windows OS that detects and troubleshoots problems that may arise during Windows startup. It can fix some of the common issues that are preventing your system from logging into the OS.

However, to perform a startup repair, you’ll have to access the Windows Recovery Environment.

If You Have a Recovery Drive

If you previously created a recovery drive, it can be useful for you now. If so, then follow the steps shown below:

If You Don’t Have a Recovery Drive

If you don’t have a recovery drive, you’ll need to download the Windows installation file first and then copy it on a USB. Once this is done, follow the steps below:

The MBR (Master Boot Record) stores information about the location of your OS on your disk drive. A damaged boot record results in Windows not starting up properly and hence, a black screen. The MBR is created when you install Windows for the first time.

For this method, you’ll need the Windows installation file on an external drive (USB), as the MBR is created during the Windows setup process. The steps below show how you can repair your boot record. 

This step requires you to boot your system using safe mode. To do this, you need a recovery drive with a Windows installation file. So, considering this, follow the steps shown below to update your graphics driver.

If the Roll Back feature isn’t available to you, you can try and reinstall your graphics driver. Here’s how to do so:

Corruptive motherboard and disk drives are often known to cause a black screen after backing out of BIOS. This might indicate a problem with your CMOS memory or your CMOS battery. Luckily, this usually can be fixed. So, take your computer to the nearest repair center and see what happens on your internal peripherals. 

And if unfortunately, that’s not the problem, then the only thing you can do is hope that it’s not beyond repair. 

How To Fix Battery Drain Issues In Windows

One persistent issue that some Windows users seem to be having is battery drain. If you’re also experiencing this, don’t worry – help is here. This post will show you how to fix the battery drain issues and also improve your battery life.

Why Your Windows PC Battery Drains Fast

There are various reasons behind battery drain issues on Windows. The most common are:

Multiple apps running in the background

PC in fast startup mode

High screen brightness on your PC

PC’s display is set for a high refresh rate

High-performance graphics for apps

How to Check Your Battery Health

A PC’s battery backup largely depends on the health of its battery, which is why you should check your system’s battery health first to assess whether it’s actually the cause of the poor backup. For the purposes of this tutorial, we’re using Windows 11.

Press Win + X and select “Windows Terminal (Admin)” from the menu.

Type the following in the command prompt and press Enter.

powercfg

/

batteryreport

/

output

"C:battery_report.html"

Your battery report will be saved in your “C:” drive. Open it from there.

Scroll down the battery report until you find the “Battery capacity history” section. The “Full charge capacity” displays the present capacity of your battery to hold power, while the “Design capacity” shows the maximum power the battery is designed to hold. Over time, the full charge capacity of the battery will decrease, but if it is much lower than the design capacity, your battery’s health is poor.

You will see the “Battery life estimates” section below the “Battery capacity history” section. This will give you an idea about the battery life at full charge compared to the design capacity of your battery. Drastically reduced battery life at full charge also indicates poor health of your PC’s battery.

1. Run Power Troubleshooter

You can use Windows’s built-in power troubleshooter tool to find and resolve battery-related issues that might be affecting your system.

Press Win + I to open “Settings” on your PC.

Go through the troubleshooting report to check for any issues and tweak settings accordingly.

2. Choose the Right Power Plan

Your Windows 11 PC has three power modes: “Best performance,” “Balanced,” and “Best power efficiency.” You’ll need to switch to the last one if you want to conserve the most battery life.

“Best power efficiency” mode works by lowering the system’s performance. (In Windows 10, it might be called “Best battery life.”) On the other hand, if you want your PC to automatically adjust energy for optimal performance according to the tasks you’re doing, you can choose the “Balanced” mode.

3. Configure Battery Saver

The “Battery Saver” feature conserves power as your laptop battery reaches critical levels. By default, your device will turn “Battery Saver” on automatically when the battery hits 20%. However, you can change when you want “Battery Saver” to kick in using the instructions below.

Press on the option next to “Turn battery save on automatically at” to select the desired percentage. You can set it as high as 50%. If you’re really concerned about battery life, opt for “Always.”

4. Customize Display Settings

You can also tweak your PC’s display settings to prevent it from consuming a lot of power and draining your computer’s battery.

Dim Screen Brightness

Also check the “Help improve battery by optimizing the content shown and brightness” box.

Lower Resolution

Change the default screen resolution of your laptop in the “Display” section and opt for a lower resolution.

Reduce Screen Refresh Rate

A higher refresh rate offers smoother-looking motion but consumes more battery power. Fortunately, you can reduce your screen’s refresh rate.

5. Adjust Video Playback Settings

The quality of videos you’re playing also impacts battery power, but Windows offers the option to optimize video playback for power saving,

You should also check the “Play video at a lower resolution when on battery” option.

Optimize HDR

Also adjust your system’s settings to optimize the display while viewing HDR video. This will prevent your Windows 11 laptop display’s brightness from automatically turning up when playing this type of video.

Choose “Optimize for battery life” from the drop-down menu under “Battery options.”

6. Close Background Apps

Apps running in the background may be another cause of battery drain in Windows. Make sure you close them properly to save battery power.

7. Disable Fast Startup

Windows comes with a default Fast Startup feature designed to lower system boot time. Unfortunately, it ends up consuming quite a lot of battery power, but you can disable it.

Uncheck the “Turn on fast startup” option.

Frequently Asked Questions Can switching to Windows’ dark theme help conserve battery life?

Using the dark theme can save battery life if your laptop has an OLED display. It doesn’t make much of a difference for other screen types. On top of that, enabling Windows’s dark theme may help reduce eye strain. You may want to enable dark mode on your Windows PC if you’re not already using it.

How can I make my laptop battery last longer while I’m gaming?

On top of the tips shared in this tutorial, you can try a few other things to prolong your gaming session. For example, you may want to turn on Vsync, use headphones, and turn off Wi-Fi and Bluetooth to help your battery last longer.

Can undervolting increase my PC’s battery life?

Yes. Put simply, undervolting is a process that reduces voltage reaching the CPU. So if you decide to undervolt your PC, it will draw less power from the battery. As a result, your computer’s battery will last longer.

Image credit: Panos Sakalakis via Unsplash. All screenshots by Sandeep Babu.

Sandeep Babu

Sandeep Babu is a tech writer. He loves writing on Windows, cybersecurity, privacy, and internet. Earlier, he was working as a publisher of QuickScream

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

Sign up for all newsletters.

By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

How To Fix Demo Import Problems In WordPress? – Webnots

Almost every commercial theme out there offers predefined templates. Many users purchase a theme mainly looking at the beautiful demo templates. However, you may face different types of problems when importing demo on your live WordPress installation. In this article, we will explain various demo import problems in WordPress along with possible fixes.

Astra Demo Templates

Types of Demo Imports in WordPress

Unfortunately, commercial WordPress themes offer varieties of ways to upload demo content. Here are some of the options that popular themes offer:

Demo import along with bundled plugins. You can install the plugins and import demo content from admin panel. Popular themes like Newspaper follows this approach that needs you to install required plugins before start using the theme.

Install Required Plugins

Importing from Site Library or Starter Templates along with demo content. Though this looks similar to the above method, here the required plugins will change based on the demo site you want to import. GeneratePress, Astra and many other popular themes use this method. You will see the list of plugins required for importing the demo and the plugins will be installed automatically along with the demo. You will also have an option to ignore the plugins and only use demo site’s settings.

Import Demo Site in GeneratePress Theme

XML file for importing demo content and text file for importing settings. For example, Highend the most popular theme in MOJO marketplace offers demo data with theme purchase as XML and text files.

Note that as far as we have checked, Envato marketplace (parent company of themeforest) has a policy of not supplying images shown in the demo content. Therefore, authors generally use placeholder images in the downloaded files. Alternatively, you may need to download content directly from developer’s site as with Newspaper theme.

Demo Import Problems in WordPress

The problem you face with demo import in WordPress highly depends on the way you upload demo content. If one option is not working for you, it is possible to try with other option to import the content.

1. Check Required Plugins for Demo Content

First thing you need to check before purchasing a commercial theme is the number bundled plugins needed for using the theme. In some cases, like Newspaper theme, the demo sites will show only after you install the required plugins. However, many themes will not show any warnings and allow you to import demo content. Your import will fail saying due to missing plugins. This is the case for the themes built based on page builder plugins.

Therefore, make sure to install and activate the required plugins before you try to import demo content.

2. Try XML Import

If normal importing of demo content fails due to hosting restriction, you can try alternate option to upload XML files. However, you need to ask your developer to provide the XML import files.

Download Demo with Attachments

It may take some time depending upon the demo content size. After finishing the import, you should see a success message “All done have Fun!”.

3. Import Only Demo Settings without Content

Whether you import content from developer’s site or use XML file, importing all attachments and media files needs lot of time. This could easily lead to time out error and your import will fail.

When importing the content, check whether you have an option to only import theme options or settings. Some commercial themes also supply theme options as a text file that you can import from the theme’s settings panel.

Import Only Theme Options

If you are using XML file import, try unchecking “Download and import file attachments” option to only download the content without attachments.

Since, demo import will create menu and import settings, try deleting all your existing menus and retry the demo import to check if that works.

4. Change Hosting Parameters

PHP errors are one of the major demo import problems in WordPress many users encounter. Many themes need long PHP run time to import demo content. However, hosting companies may terminate the PHP scripts when running beyond the acceptable time thus terminating your demo import in-between. Similarly, you may see other problems when running out of memory or exceeding upload file size. In these cases, you should see a relevant PHP warning or error message. This type of problem happens especially when you are using cheap shared hosting companies for your website.

When you see PHP errors, we recommend you to first check with the theme developer on the requirements for importing demo content. Below is an example of requirements for Newspaper theme.

Theme Requirements

After getting these details, confirm with your hosting company whether they support these requirements. In fact, you should do this at first before purchasing a theme. If your hosting company allows to change the parameters, you can add the following parameters in your chúng tôi file:

max_execution_time = 300 max_input_vars = 3000 memory_limit = 256M post_max_size = 32M upload_max_filesize = 32M

Most of the shared hosting company may not allow you to access chúng tôi file. In such a case, you can use .htaccess directives to change the parameters.

php_value max_execution_time 300 php_value max_input_vars 3000 php_value memory_limit 256M php_value post_max_size 32M php_value upload_max_filesize 32M

If you see a memory exhausted problem, you can increase the memory size in chúng tôi file by adding the below line:

define('WP_MEMORY_LIMIT', '256M');

These are some of the common parameters that affects the demo content import. Make sure to understand the error and only add the required parameters. Also, adjust the values as per your need and within the allowed limit for your hosting plan. Similarly, most WordPress themes will work only with the latest PHP version. You may need to switch the PHP version in order to use the theme. Here, you have to test the site thoroughly to make sure all plugins work without problem.

5. Get Support from Hosting and Theme Developer

If none of the above fixes resolve your problem, the only option left is to contact your theme developer. Get the complete requirement details for installing demo content and updating theme panel settings. In most cases, you may need to get help from your hosting company to adjust the parameters if you are not allowed to do as explained above.

In addition, when downloading demo content from developer’s site, you need to have “allow_url_fopen” enabled on your server. This will allow your server to get the demo files from third-party sites like your developer’s site. You can enable this parameter using chúng tôi file or using PHP manager app from hosting panel. However, you to confirm whether your hosting company will support especially on shared server.

Final Words

We strongly recommend you checking the installation and demo import requirements from the theme developer before you purchase. It helps you to understand whether your hosting company supports the theme and get help on PHP related issues. Other demo import problems in WordPress are easy to fix with XML import or by only importing settings. It is also a good idea to only use the settings instead of importing everything, as you have to anyway delete the dummy content later.

Update the detailed information about How To Fix Battery Problems After A Software Update on the Daihoichemgio.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!