Trending February 2024 # Latest Twrp Recovery For Us Cellular Galaxy S3 (Android 4.4 Compatible!) # Suggested March 2024 # Top 6 Popular

You are reading the article Latest Twrp Recovery For Us Cellular Galaxy S3 (Android 4.4 Compatible!) updated in February 2024 on the website Daihoichemgio.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Latest Twrp Recovery For Us Cellular Galaxy S3 (Android 4.4 Compatible!)

With both carriers of the model SCH-R530 of Galaxy S3 getting the latest TWRP update, the US Cellular variant couldn’t be left behind, of course. The latest version promises to be void of the recovery in-compatibility issue with KitKat ROMs, which was due to ‘set metadata recursive’ error.

The latest version of TWRP would be compatible with all the Android 4.4 ROMs like CyanogenMod 11, OmniRom, RastaKat, etc. Now, you wouldn’t face the ‘set metadata recursive’ error.

The latest version of TWRP for US Cellular Galaxy S3, at the time of posting is 2.6.3.0.

WARNING!

Warranty may be void of your device if you follow the procedures given on this page!

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SCH-R530!

Note that this post is intended only for US Cellular carrier of SCH-R530 model and not for Cricket and Metro PCS carriers.

Please know that this page is meant only for Samsung Galaxy S3, model no. SCH-R530. Please DO NOT try the procedures given here on other variants of the Galaxy S3: GT-I9300/GT-I9305, or the S4 sets at T-Mobile, AT&T, Verizon, Sprint, and others who have different model no.

BEFORE YOU BEGIN..

You must do this pre-installation stuff before attempting to install TWRP Recovery on your US Cellular Galaxy S3 in order to avoid any complications later, and have a smooth and successful process.

BACK UP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on sd card, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

INSTALL GALAXY S3 DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully flash TWRP Recovery on your Samsung Galaxy S3. In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy S3 on your computer.

► SAMSUNG GALAXY S3 DRIVERS INSTALLATION GUIDE

CHARGE YOUR DEVICES

If your android device, or PC, powers off due to lack of battery while the process is underway, it could damage the device.

So, make sure both of them are adequately charged and that no power interruption takes place when the process is undergoing — at least 50% battery of the device and laptop is what we would recommend.

OTHER THINGS TO TAKE CARE OF:

└ Use original USB cable to connect your phone to PC.

└ Do not use the procedures given below on Mac (using VMWare) as it works best on proper Windows PC only.

EXAMPLE VIDEO

If you haven’t used Odin software to install a recovery on a Samsung galaxy device before, we suggest you first watch a video of that, given right below, to get familiar with the process.

Btw, the video below shows installing the the CWM (Yes, not TWRP) recovery on Samsung Galaxy S3, but as the process is exactly same, it doesn’t matter.

GUIDE: SAMSUNG GALAXY S3 TWRP RECOVERY

DOWNLOADS

Download the file given below and save them in a separate folder on your computer (just to keep things tidy, that is).

File name: samsung-galaxy-s3-uscellular-twrp-odin.zip (7.6 MB)

STEP-BY-STEP GUIDE

Extract/Unzip the TWRP Recovery file, samsung-galaxy-s3-uscellular-twrp-odin.zip on your computer (using 7-zip free software, preferably). You’ll get the following files:

Odin3 v3.09.exe

Odin3.ini

openrecovery-twrp-2.6.3.0-d2usc.tar

Disconnect the Galaxy S3 from PC if it is connected.

Boot your US Cellular Galaxy S3 into Download Mode: (The image below of Galaxy Note 2 would help)

Power off your phone first and wait for 6-7 seconds after display is off.

Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home.

If you don’t get the Added! message, here are some 

troubleshooting tips

:

Make sure you have installed driver for Galaxy S3 as said above in ‘Before you begin..’ section.

If you have already installed driver, then uninstall them and reinstall back.

Connect using a different USB port on your PC.

Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.

Reboot phone and PC and then try again.

Load the recovery file (extracted in Step 1) into Odin as instructed below:

Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)

Double check the above two steps.

If you see FAIL message instead of the RESET in Odin’s top left box, that a problem. Try this now: disconnect your Galaxy S3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Galaxy S3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

Feedback Us!

It was easy, right? Let us know what you plan to do now, with latest TWRP Recovery installed. Looking to install Android 4.4 KitKat maybe, eh?

Suggestions are most welcomed!

You're reading Latest Twrp Recovery For Us Cellular Galaxy S3 (Android 4.4 Compatible!)

New Twrp Recovery For Moto X, Works Cool With Android 4.4 Kitkat Ota Update

Well, Motorola just surprised us for good by launching the new Android 4.4 KitKat update already, which is incredibly quick, for the Moto X.

But, due to changes in KitKat’s code, the old TWRP doesn’t work anymore. While we’re sure TWRP team will be hard at work and would bring the new version of the recovery soon, the good news is that developer Hashcode has already come up with a solution and has modified the version 2.6.3.1 of the TWRP recovery, not the latest btw, to work with Android 4.4.

So, if you have updated to Android 4.4, you can flash this modified TWRP v2.6.3.1 by hashcode to bring back the TWRP to action.

Note: Your Moto X needs to be bootloader unlocked for this, and you must have proper and working drivers installed.

WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be XT1053! 

This procedure is not for other variants of Moto X on carriers like Verizon, AT&T, etc. It would work all nice with developer edition, btw.

Do not use the procedures discussed here on any device of Motorola or any other company. You have been warned!

BEFORE YOU BEGIN..

You must do this pre-installation stuff before attempting to install TWRP recovery on your Moto X in order to avoid any complications later, and have a smooth and successful process.

BACK UP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

INSTALL MOTO X DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully install a firmware on your Moto X. In case you’re not sure, follow the link below for a definitive guide for installing driver for your Moto X on your computer.

► Moto X DRIVERS (ADB and Fastboot)

CHARGE YOUR DEVICE

If your android device or your PC/Laptop powers off due to lack of battery while the process is in progress, it could damage your device.

So, make sure your devices is adequately charged — at least 50% battery is what we would suggest.

GUIDE: Modified TWRP Reocvery for Moto X, works well with Android 4.4

I. AUTOMATED ONE CLICK INSTALL METHOD

DOWNLOADS

STEP-BY-STEP GUIDE

You need to unlock bootloader of your Moto X first to be able to install TWRP recovery. Since unlocking bootloader would completely wipe (delete everything) on your Moto X, be sure to backup your phone adequately before attempting to unlock bootloader and install custom recovery.

Prepare your phone:

Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options.

Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section).

Extract the installer file (using 7-zip, preferably), Moto X modified TWRP recovery chúng tôi You’ll get the following files, and one folder:

api (folder)

adb.exe

AdbWinApi.dll

AdbWinUsbApi.dll

fastboot.exe

source.properties

twrp-2.6.3.1-ghost-4.4.img

Let’s boot your Moto X into recovery mode to verify if TWRP recovery has been installed successfully:

Switch off your Moto X

Press and hold ‘Volume Down + Power’ button together to boot into bootloader/fastboot mode

Press Volume Down now to go to option Recovery and then press Volume Up button. You will see blue Motorola logo and then a little Android with exclamation sign

Now, press Volume Up and Power button together to bring up the recovery mode, and should see TWRP recovery here

That’s all!

ALTERNATIVE METHOD: DO IT ALL MANUALLY

II. MANUAL METHOD

DOWNLOADS

TWRP Recovery File (Modified TWRP recovery v2.6.3.1 for Moto X)

Fastboot and ADB files

STEP-BY-STEP GUIDE

You need to unlock bootloader of your Moto X first to be able to install TWRP recovery. Since unlocking bootloader would completely wipe (delete everything) on your Moto X, be sure to backup your phone adequately before attempting to unlock bootloader and install custom recovery. Link – Moto X BOOTLOADER UNLOCKING GUIDE.

Prepare your phone:

Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options.

Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section).

Boot your Moto X into Fastboot mode now:

For this, power off your Moto X first.

Now, Press and hold these Volume Down and Power button together and when device begins to restart, release the power button but keep holding Volume Down button until you see Fastboot Mode.

Extract the fastboot files (using 7-zip free software, preferably), Fastboot and ADB chúng tôi to any folder or new folder.

Now, copy the TWRP recovery file to the folder where you extracted the fastboot files so that the recovery file remains in the same folder where chúng tôi file is.

Connect your Moto X to your Windows PC now.

Now type the below and press enter key fastboot flash recovery twrp-2.6.3.1-ghost-4.4.img

Type the below and press enter key to reboot the device. fastboot reboot

Let’s boot your Moto X into recovery mode to verify if TWRP recovery has been installed successfully:

Switch off your Moto X

Press and hold ‘Volume Down + Power’ button together to boot into bootloader/fastboot mode

Press Volume Down now to go to option Recovery and then press Volume Up button. You will see blue Motorola logo and then a little Android with exclamation sign

Now, press Volume Up and Power button together to bring up the recovery mode, and should see TWRP recovery here

That’s all!

Your suggestions are most welcomed!

Latest Moto E (2014) Twrp Recovery V3.0

Update: TWRP 3.0 is now available for the original Moto E (1st Gen, 2014 edition) and we have shared the download link right below. Because TWRP 3.0 is new and packs great deal of improvements and new features addition over v2.x, there could be some issues here and there, although very, very unlikely. But we have kept the older, tested and confirmed wokring version 2.8.x too below, so that you can install older version in case TWRP 3.0 doesn’t work, or you face any issues with it. Enjoy!

For some time now, the development of TWRP recovery for the original Moto E, 1st Gen, released back in 2014, was stopped. But thanks to user  , the development has kicked off again and now you have the pleasure of using the TWRP v2.8.6.0 on your Moto E 2014 edition. Please note this is original Moto E 1st gen model, and not the recently released Moto E 2nd Gen, for which you can find the TWRP recovery over here.

There are two ways to install the given TWRP recovery, v2.8.6.0, on your Moto E 1st gen. First, if your Moto E is rooted, in which case you can simply download an app to install the .img file of TWRP recovery. You can use flashify app, or the TWRP manager app itself. Just provide the app root access when you open it for the first time, and then choose recovery option. Then select the .img file of TWRP recovery (download link is below, transfer it to your phone first) and the app will do the job for you.

The second method of installing the TWRP recovery does not require root access. Further, you can then use the TWRp recovery itself to root your Moto E. This method uses fastboot and is 100% working way to install recovery via its .img file. The guide below will help you installing the TWRP recovery on Moto E using the fastboot method.

Supported devices

1st Gen Moto E (2014)

Don’t try on 2nd Gen Moto E (2024)

Don’t try on any other Android device

TWRP Recovery

Version 3.0 — Link

Version 2.8.7.x — Link

Credit for TWRP 3.0 — magdeoz over at XDA.

Installation Instructions

WARNING: Warranty may be void of your device if you follow the procedures given on this page. You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

Important Note: Backup important files (music, photos, documents, videos, etc.) stored on your device before proceeding with the steps below.

Get ADB working properly on your PC first. Check out our ADB installation guide for this. Just install ADB and then come back to this guide.

Unlock bootloader of your Moto E if you haven’t already. For help, check out this page for help.

Reboot to fastboot mode:

Power off your Moto E first. Wait for 5-6 seconds after screen goes off.

Press and hold Power+Volume Down together for few seconds until you reach fastboot screen.

Connect your device to PC now.

Open the folder on your PC where you have the TWRP recovery’s file. Be sure to rename the TWRP file to moto-e-twrp (full name with extension will be moto-e-twrp.img).

Open the command window at the location where you have the TWRP recovery:

Select the option: Open command window here

Copy the command below, and paste it in command window. Then hit enter to begin flashing the recovery. (Replace flash recovery with boot in the command below if you want to test it first.) fastboot flash recovery moto-e-twrp.img

Once done, type the below and hit enter key to restart your device. fastboot reboot

Optional: Take a backup now. With TWRP 3.0 installed, the first thing you should do is take backup. It’s highly recommended! Boot into recovery mode and take a backup. To reboot into fastboot mode, boot into fastboot mode as stated in step 3, and then press volume down button repeatedly till you see recovery appearing on screen, and then press power button to select and boot into recovery mode.

Happy flashing!

How To Install Us Cellular Galaxy S4 Lollipop Update

At last the Galaxy S4 users at US Cellular have the Android 5.0 Lollipop update treat available. It’s a long wait no doubt, almost nine months since Lollipop was released. While other Galaxy S4 sets received the update way earlier, it was poor from US Cellular to delay the update for so long.

This is also perhaps the last update US Cellular Galaxy S4 will see, as there are very slim chances of Android 5.1 making it to the device. And absolutely no chances of an Android M update for US Cellular S4.

If you can’t install OTA update, or haven’t received the Lollipop OTA yet, you can still update your US Cellular S4 to Android 5.0 by downloading and installing the full firmware manually.

Just look at the guide below, which will help you in using Odin PC software to install and update your USC S4 to Android 5.0.

Supported devices

US CELLULAR GALAXY S4, model no. SCH-R970

Don’t try this on any other Samsung Galaxy S4 or any device than model no. R970!

Don’t try on any other device whatsoever!

Instructions

Disclamer: Installing an official firmware through Odin doesn’t void your device’s warranty, but it remains an unofficial process and thus you need to be cautious of it. In any case, you only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files. Sometimes, Odin installation may delete everything on your device!

Download the Odin software and firmware file from above for your US Cellular S4.

You should get the a file in chúng tôi format now. We will be loading this file into Odin, to be installed on your Galaxy S4 (in step 10 below).

Extract the Odin file. You should get this file, Odin3 chúng tôi (other files could be hidden, hence not visible).

Disconnect your S4 from PC if it is connected.

Boot USC Galaxy S4 into download mode:

Power off your S4. Wait 6-7 seconds after screen goes off.

Press and hold the three buttons Volume Down + Power + Home together until you see warning screen.

Press Volume Up to continue to download mode.

Connect your Galaxy S4 to PC now using USB cable. Odin should recognize your S4. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in bottom left, and the first box under ID:COM will also show a no. and turn its background blue. Look at the pic below.

You cannot proceed until you get the Added!! message, which confirms that Odin has recognized your device.

If you don’t get Added!! message, you need to install/re-install drivers again, and use the original cable that came with device. Mostly, drivers are the problem (look at step 2 above).

If Odin gets stuck at setup connection, then you need to do steps 6 to 12 again. For this, close Odin, disconnect your device, remove battery, insert it back after 5-6 seconds and then start from step 6 again.

That’s it. Enjoy the Android 5.0.1 OE2 update firmware, on your US Cellular Galaxy S4!

How To Take Screenshots On Pc Of Twrp/Cwm Recovery And Android

If you ever felt the need of grabbing an screenshot of your Android phone directly to PC, there’s a good solution available now for that thanks to CarlivScreenshot tool. It uses ADB — must be working! — to snap up the shot of your Android device’s screen and saves the image directly on PC. CarlivScreenshot is available both for Linux and Windows OS. What’s more, you can even snap up your recovery’s screen, whether it’s TWRP, CWM or any other recovery.

What you need?

Of course, an Android phone or tablet, whose screen you’re looking to snap up

ADB working alright

adb_insecure.apk for some phones that restrict ADB’s access to screencap utility. This maybe the case with some Samsung phones, so you’d need root access on such devices, and then install the adb_insecure APK and provide it root access.

How to take screenshot to PC from Android and TWRP/CWM recovery

Step 1: Enabled USB debugging on your Android device.

Go to Settings, then About phone

Tap build no. 7 times to enable developer options in Settings

Go back to settings, and find the developer options, tap on it

Find and select the USB debugging option, tap OK on the Pop-up to confirm

Step 2: Install ADB drivers

ADB is a connection basically tat allows your PC with ADB tool of Android SDK to talk to phone and perform variety of necessary functions, one of them taking screenshot and transferring that to PC.

Check out our ADB installation guide for help. It has everything you need, and it does all all the installation automatically.

Test ADB now.

Connect phone to PC with USB debugging on. Open a command prompt window on your windows PC and type the command adb devices and then hit enter key. You should get a serial no. with device written after it. See the screenshot above. If you get that, it means ADB is working fine on your PC. If not, you got to solve this problem first to be able to use CarlivScreenshot tool.

Step 3: Set up CarlivScreenshot tool

Download the CarlivScreenshot tool for your Windows or Linux PC first.

Step 4: Using the CarlivScreenshot to take screenshot on PC from Android or TWRP/CWM recovery

Option 1: Using CarlivScreenshot in Recovery mode

If your Android device is in recovery mode, whether it’s TWRP, CWM or any other custom recovery, select recovery’s options by hitting the ‘R’ key, following by enter key. Remember, ADB must be working in recovery mode too. You can test this by booting the phone into recovery mode and then running the adb devices command to get serial no. with device written after it. Example image below, that confirms ADB is working in recovery mode.

Once you select recovery in the tool, you’ll get this:

Now, simply hit the ‘S’ key to grab a screenshot, which will produce screen like this one.

Hit any key to continue and get the tool ready for another screenshot. Easy, right?

Option 2: Using CarlivScreenshot in normal Android mode, that is, when device is powered on

However, if your Android device is in, well, Android mode, powered on normally that is, hit the ‘A’ button followed by enter key to bring up Android’s option set in the tool. New options set will look like this.

Next, hit the ‘S’ key to take screenshot of the current screen on your Android device, for directly saving on PC. When you do so, a folder for Android screenshots will be created inside the CarlivScreenshot’s folder , inside which you’ll find the screenshots. Tool’s screen will look like this.

That’s it.

So, we’ve seen how to grab a screenshot from a TWRP recovery or the normal Android powered on state. Here’s how the CarlivScreenshot folder looks like on my windows PC.

Credits:

majdinj for the initial script.

Kyan.ql, Phil3759 and McKael for the fb2png source and hints (found on their posts).

We hope you like the screenshot tool very much, and in case you care to donate to the developers who made it possible, find the developer Carliv’s page here, where you can donate to him. Here’s a link to development page of the tool, where you can keep track of latest developments of the tool, including updates, bugs if any along with the fixes available.

How To Downgrade Galaxy S3 Gt

  WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

  SAMSUNG GALAXY S3 GT-I9300 OFFICIAL JELLY BEAN 4.1.2 FIRMWARE

Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

  STEP 0: CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be GT-I9300!

Do not use the procedures discussed here on any other Galaxy S3 (including the Galaxy S3 variant at T-Mobile, Sprint, US-Cellular, AT&T, Verizon and other International LTE variants) or any other device of Samsung or any other company. You have been warned!

  STEP 1: BACKUP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

  STEP 2: INSTALL LATEST DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully flash stock firmware on your Samsung Galaxy S3. In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy S3 on your computer.

► SAMSUNG GALAXY S3 DRIVERS INSTALLATION GUIDE

   STEP 3: INSTALLATION INSTRUCTIONS   DOWNLOADS

Download the Odin zip file and firmware file given below. Transfer both Odin and firmware file to a separate folder on your computer just to keep things tidy.

  ODIN ZIP FILE   FIRMWARE ZIP FILE   STEP-BY-STEP GUIDE

Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing stock firmware, which might delete internal sd card too, your files will remain safe on PC.

Extract/Unzip the Odin zip file, Latest Odin3 v3.09.zip on your computer (using 7-zip free software, preferably) to get this file: Odin3 v3.09.exe

Extract/Unzip the Firmware zip file, I9300XXEMG4_I9300OXAEMG4_BTU.zip on your computer (using 7-zip free software, preferably) to get this file: KIES_HOME_I9300XXEMG4_I9300OXAEMG4_1314436_REV00_user_low_ship.tar.md5

Move the friwmare file, tar.md5, in the same folder in which you extracted Latest Odin3 v3.09.zip (Just for your convenience, that is). So, now you’ll have the following files in that folder:

Odin3 v3.09.exe

KIES_HOME_I9300XXEMG4_I9300OXAEMG4_1314436_REV00_user_low_ship.tar.md5

Disconnect the Galaxy S3 from PC if it is connected.

Boot your Samsung Galaxy S3 into Download Mode:

Power off your phone first and wait for 6-7 seconds after display is off

Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home

If you don’t get the Added! message, here are some troubleshooting tips:

Make sure you have installed driver for Galaxy S3 as said above in ‘Before you begin..’ section.

If you have already installed driver, then uninstall them and reinstall back.

Connect using a different USB port on your PC.

Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.

Reboot phone and PC and then try again.

Load the firmware file (extracted in Step 1) into Odin as instructed below:

Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)

Double check the above two steps.

If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy S3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your S3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

FEEDBACK US!

Your suggestions and queries, if any, are most welcomed!

Update the detailed information about Latest Twrp Recovery For Us Cellular Galaxy S3 (Android 4.4 Compatible!) on the Daihoichemgio.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!